Posted on September 11, 2013 at 12:12pm
Hi DIY guys, I would like to show you my almost finished Tarot FY680 setup.
I saw different approaches for ESC mounting. I choose bottom because a couple of reasons:1-My motors wires were long enough to reach central frame,…
Posted on May 11, 2013 at 9:00pm
The last post I show you pictures of my 3D printed quad. It took me more than thought to test it in flight. The climate and labor, plotted.
Test flight was successful. It flew solid, pretty stable, less noisy than my other models…
Posted on April 28, 2013 at 4:30am
I have been working on this model for almost two months. The idea was to create a mid/heavy-lift 3D printed folding/detachable quadcopter. this is the first prototype that I have printed out.
Hope you guys helps me to improve the design. There is a lot of things to do before it's done. For example battery holder, in different alternative…
Posted on January 18, 2013 at 5:30am
Last post I presented this homemade hexacopter. This is primarily a mechanical steadycam style motion compensation/smoothing system, the 2 servos (roll, pitch) engage and act as dampers to reduce oscillation and alter the "home" position to…
Join DIY Drones
Welcome toDIY Drones
Sign Upor Sign In
Or sign in with:
© 2018 Created by Chris Anderson.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.