"Isn't it always after you ask the question that the answer presents itself. We've figured out that the radio can't handle a constant stream of data when it boots up. If we wait to plug in the data wire until moments after booting up,…"
Thomas Stanley-Jones's Groups
-
UgCS
240 members
-
Companion Computer Worki…
154 members
-
Tower (Droidplanner)
153 members
-
ArduBoat User Group
246 members
-
X-UAV Talon
158 members
Thomas Stanley-Jones's Discussions
Help with Camera Battery Hack
Started this discussion. Last reply by Chris Alford May 19, 2016. 11 Replies 0 Likes
I was hoping someone could tell me why this isn't working for me. I have an …Continue
Tower as secondary base station
Started Jul 27, 2015 0 Replies 0 Likes
I have been fiddling with the RFD900 and 3dr radios. My goal is to have a laptop with the RFD900 connected to a vehicle with either a 3dr radio or another RFD900, as well as a tablet connected to…Continue
Can a Pixhawk be tested?
Started this discussion. Last reply by Thomas Stanley-Jones Jul 4, 2015. 2 Replies 0 Likes
I've attached the log of a Pixhawk I have which came with my first drone. It experienced a few crashes while I was very inexperienced. After my last crash with this copter I began to suspect that…Continue
IMU's around the outside of a multicopter
Started May 19, 2015 0 Replies 0 Likes
Hi,Is there a way to mount the IMU's on the outboard portion of a multicopter frame, rather than the center? I want to build a copter that's just a hoop, with no structure in the middle, but I would…Continue
Tags: multicopter, IMUs, multiple, autopilot
Thomas Stanley-Jones's Page
DIYDronesFeed
Loading feed
Latest Activity
Thomas Stanley-Jones replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem"Alright, I'm back. I've decided to use two RFD radio sets. Radio 1 is on the UAV and communicates with Radio 2. Radio 2 is in the Relay box mounted on a mast some distance from the Pilot. It is connected to Radio 3 using the Tx/Rx wires…"
Thomas Stanley-Jones replied to R.E.R.'s discussion Geo tagging aerial film footage."I use Race Render 3 to match the video with the GPS log. In your case you could have the coordinate displayed in the corner of the video. Depends on what you need the end result to be."
Thomas Stanley-Jones replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem"Thanks for the suggestions. I think I'll try to find someone who can make an active USB extension out of silicone wire or something so it's not going to break in sub zero temperatures. I suppose this should also have some kind…"
Thomas Stanley-Jones replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem"I'm looking to put the antennas for my 900+ (for uav basestation) and 900x (for remote instrument control) up on a pole (up to 60' if possible). Can I use SMA extensions to connect the RFD radios on the ground to their dipole…"
Thomas Stanley-Jones replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem"When you say checked the baud rate to be 57600, did you check the settings on the individual radios? Use RFD’s tool for that, downloadable from their website. I remember I needed to use version 1.5 for some reason later ones didn’t wok…"
Thomas Stanley-Jones commented on Tomi Piriyev's blog post DroneePlotter - Drone Flight Log Analysis Tool Works on Web Browser"That's really great. Love to see improvement in this area."
Profile Information
- Please tell us a bit about your UAV interest
- Northen Canada related uses
- Hometown:
- Flin Flon
Comment Wall
- No comments yet!
Top Discussions
Groups
-
ArduCopter User Group
3138 members
-
UgCS
240 members
-
ArduPlane User Group
1456 members
-
ArduBoat User Group
246 members
-
Arducopter Y6 Owners
367 members
© 2018 Created by Chris Anderson.
Powered by
