Please tell us a bit about your UAV interest
Looking for video platform
About
Hometown:
Bay Area
Activity Feed
"Great job Nick!!!
How about posting this accomplishment on discuss.ardupilot.org as well?"
How about posting this accomplishment on discuss.ardupilot.org as well?"
"Search for the cli_enable parameter, change it from 0 to 1, and access to terminal works. It was not removed, it was disabled by default."
"Search for the cli_enable parameter, change it from 0 to 1, and access to terminal works. It was not removed, it was disabled by default."
"Tom,
Yeah, not too concerned with that particular platform. More interested in the concept, as shown in the link in the previous comment.
So, to your knowledge, tail sitter config is not supported on Pixhawk/APM3.6, correct?
Thanks!"
Yeah, not too concerned with that particular platform. More interested in the concept, as shown in the link in the previous comment.
So, to your knowledge, tail sitter config is not supported on Pixhawk/APM3.6, correct?
Thanks!"
"Hello Andrew,
Does the above apply to the tail sitter/lander/landing configuration as well, as noted in the configuration below?
http://dev.px4.io/airframes-vtol-caipiroshka.html
Thanks!"
Does the above apply to the tail sitter/lander/landing configuration as well, as noted in the configuration below?
http://dev.px4.io/airframes-vtol-caipiroshka.html
Thanks!"
"@Silvio,
what will be coming in 4Gmetry 4?"
what will be coming in 4Gmetry 4?"
"Here are the items I used depicted in the picture above. Also noted and referenced here
https://community.emlid.com/t/hot-shoe-integration/2539/3
Standard hot shoe Sony adapter
www.amazon.com
Promaster Sony/Maxxum to Standard Hot Shoe Adapter…"
https://community.emlid.com/t/hot-shoe-integration/2539/3
Standard hot shoe Sony adapter
www.amazon.com
Promaster Sony/Maxxum to Standard Hot Shoe Adapter…"
"There needs to be a way of connecting to a cloud based host to pass the traffic, from UAV to cloud host to laptop/gcs in the field. That is the issue, correct?"
"THE NEW SITE KICKS ASS!!! Great job on setting up the discuss.ardupilot.org!!!!"
"Not clear on what you mean by defining the start point. Here is what I do;
1. Polygon, Simple Grid, Split into 3 segments, Accept
2. There are additional WP's in the lower dialogue box, with RTL's and Takeoff's.
3. Write mission
4. Take off and…"
1. Polygon, Simple Grid, Split into 3 segments, Accept
2. There are additional WP's in the lower dialogue box, with RTL's and Takeoff's.
3. Write mission
4. Take off and…"
"Copter.
So, currently no documentation then?"
So, currently no documentation then?"
"^^^^^^^^WHAT HE SAID!!! Thank you RP!!!"
"I did.
Landed, swapped the batt, started up in stab, transitioned to loiter, then auto, which it them proceeded to WP1 and began all over again.
Did this twice, both times going to auto, mission started over again at WP1.
Is there any documentation…"
Landed, swapped the batt, started up in stab, transitioned to loiter, then auto, which it them proceeded to WP1 and began all over again.
Did this twice, both times going to auto, mission started over again at WP1.
Is there any documentation…"
Has anybody used or know where the documentation is which explains the use of "Split into x segments" on the simple grid mission plan?http://prntscr.com/a82ugzUsing MP 1.3.35.Thanks in advance.
"Patrick,
Thanks for the reply, and all you have noted make perfect sense. That said, it all makes for some exciting times in the robotics tech arena! The new DOT COM play. :)
I will be receiving some of the Navio2's and would be interested in…"
Thanks for the reply, and all you have noted make perfect sense. That said, it all makes for some exciting times in the robotics tech arena! The new DOT COM play. :)
I will be receiving some of the Navio2's and would be interested in…"
