I have flight gear installed, I have the ArduFlight_247 code running on the arduPilot and I am using a arduIMU. I have made a mission with the Config tool download and I have downloaded the arduFGcontrol1.1 file..... But can someone give me a step by
It seems that the ArduPilot guys are doing a great job and are really starting to push new development, but I'm having an issue with it all. If I want to get everything going right now, it seems very easy enough to buy the ArduPilot, the plane, and
I have this setup running. I have arduPilot with blue arduPilot shield along with ublox gps and arduIMU. In fly by wire and stabilization mode without the blue arduPilot shield, these two modes work perfectly. However, when I put the shield on the a
I've developed a sudden interest in quadcopters, and have been doing some reading. However, there are a few questions I haven't found answers for, so I'd like to draw on the expertise-at-large here.
1) I understand the basic control theory of how QC'
Hi, I'm completely new to the drone/autopilot community, but I'm using (or attempting to use) an ardu-imu in a school project. My goal is to use the IMU's sensor data to actuate a servo-operated camera gimbal system to keep a camera facing orthogonal
i want to do a project on anteena tracking based on maximum recieved signal strength so if any body provide me the circuit as well as the software because i am much confused about how to move anteena automatically with the moving object please help
Has anyone had any luck measuring fuel flow or fuel volume in a glow fuel powered aircraft?
I was contemplating using a differential pressure sensor to calculate the mass flow rate between the tank and the needle valve, but I have a hunch that the ove
I think this AeroQuad project is an excellent platform for a DIY drone, from looking at their website. I have been evaluating which way to go with these Multi-rotor aircraft as there are some good looking projects out there.
HI, reading thru the ardupilot 's wiki on google code I came across this very intresting feature, the ability of uploading P and I values to the ardupilot via Xbee
Guys Im having a big issue with ardupilot 2.5.xx: No matter what, my NMEA gps, wich works perfectly with ardupilots till 2.4.xx, will not obtain lock. Any idea/suggestion? thankyou very much
i bought the arduimu v2 flat,the EM406 gps,the connector,the cable and the ftdi cable. i connected them right with "clear sky" but the gps doesn't working..... what to do ??????????
I know that some commercial UAVs have a feature which allows the pilot to choose a vehicle and the UAV tracks/follows it.On the arudupilot mega, other than a camera, would I need additional hardware to program such a feature?