As an owner of the Turnigy 9X radio I've been secretly having day dreams of a firmware hack for it and now it has happened: http://sourceforge.net/projects/radioclone/
There's also some talk about it on RC Groups. It's not quite finished yet and so fa
Again a noob question. What is the purpose of Air vs Ground start in practical terms? The difference seems obvious, start GPS in the Air or on the Ground. The bind plug isn't used with the IMU from what I've read so wouldn't the GPS be set to Ground
Read more…First let me say thanks to the all teams for their hard efforts,Two simple questions with reference to the config tool.1. Is it possible to have a trigger/event option at each waypoint? I’m happy to modify the base code to utilise the trigger point (
Read more…S.O.S. .........
I am new to the UAV community and I am very excited about the possibilities. I am learning a lot....steep learning curve.
I received my new ArduIMU V2 and ublox GS407 (with DIYdrones adapter board, preprogramed for ArduPilot) via UP
Hi all!
I'm currently really new to ArduPilot and I'm trying to make a Ground Vehicle out of it using this card.
So far, just to test the card, I've defined a mission and wanted to simulate it. But after loading the mission and making the arrangments
Read more…I have built a few Helis in the past but never a Tri or Quad Copter. They seem very cool. Has anyone heard of or thought about a Gas powered TriCopter? It seems like it would work, and now I really want to try. I have not come up with a good reas
Read more…I used to fly Ardupilot with 2.46 and it works without any problems and very happy about its performance but recently I have been upgrading from 2.46 into 2.502 or 2.503 but never work it out. It seems that CH1 and CH2 serve plus can not be detected.
Read more…Is there a reason the DIY Ublox is set to 38400. I down loaded U-center and it looks to me like you can set it to what ever standard rate you want. I would like to set mine to 57600 to be compatible with my new Open Log. Of course I would also modify
Read more…I Have just purchased the Xbee with the evaluation kit. I was wondering what the code to program into the Xbee and which pins to where just to send basic analog signal and digital signal?
Not related but extremely interesting.
http://www.semana.com/noticias-ciencia/fotos-tierra-camara-pinatera/137036.aspx
Read more…Hi, I'm an absolute newbie but since I've heard about quadrocopters, I think of nothing else than to build one myself :-)
Thats where I need help...
I have looked through the internet and found the Arduino-Board which i think can be used for an Quadroc
I've seen a few interesting posts about people who have remolded the EasyStar and made their own fuselages and such, but I'm clueless as to how. I've done some searches but I don't think I'm looking for the right terms... So, how do you make your mol
Read more…OK... So lets start.. Tried lots of code versions. Tweaked all of the gains, ect.
Started using version 2.5.02, same problems... Couln't get the autopilot to function correctly, turn the gains down and it wouldn't follow waypoints nor RTL, turn it up
hello,
i have a mikrokopter with FC ME and latest software.i will used my XBEE-868-PRO module´s for connection between the MK and MK-TOOL....
i used following adapter on MK and pc:
MK: http://www.sparkfun.com/commerce/product_info.php?products_id=9132
PC
Hello again.
I've started to think this. Is it really worth of it? Yes, I'm really interested in UAVs, Different kind RC airplanes and so on, but what if this goes over? That I lose my interest to these after I have spent some money? I would have som
Hello!
I'm new in working with GPS and would like an example code for the Venus GPS hooked up with an Arduino board.
Someone who knows a good code?
hi all i am currently trying to buy my first setup.
i am trying to purchase the ArduPilot Shield V2 Kit, but when i add to cart it says the servo extentions are not in stock.
but if you go to the cables/connectors tab they are availible.
i tried look
Read more…