Hi all,
I'mm looking for a gimbal for quadcopter for the MicaSense RedEdge multispectral- can anyone point me in the right direction?
It seems like the gimbal is sold with the drone in most cases, like the Vader Steadidrone and the micasense platform,
Read more…https://goo.gl/MhbHGh
GRAND PRIZE:
Dear members,
with my octo (X8 frame; APM and MP on latest stable version) i did a survey mission some days ago and had two "instability issues" in the middle of the flight (on a part of the mission when the flight path was just straight on flying).
Th
Hello everybody,
I plan to build a UAV for environmental monitoring, so came a question. What is currently the best fixed-wing airframe, considering the following aspects: payload of up to 3kg, stability, manual launch.
Thanks a lot!
Read more…Hi,
I have a question about the generation of MAVLink messages.
I am constructing my own MAVLink messages, in hex format.
The seq number has a range from 0 to 255 (00-FF), but what happens is the seq number reaches the max amount of 255? Does is start o
Read more…good day gurus
ive set up a y6b with apm 2.6
flown it in stab mode
but when i switch it to alt hold is hear the motors are pulsating or oscilating but you cannot see it,
already done
thr_mid and it 350
thr_min 100
the two are set right now
now i havent tou
Read more…Hi
Finally bought the 3RD solo.
I trying to write some software that will be able to get information (telemetry data) from the drone and sending flying commands to the drone.
I reading the Solo development guid and i still can't understand some issues
Read more…I am getting a PX4IO board not found error on boot of my newish Pixhack. Looking through various forums, it seems an issue may be the 3.3v regulator has broken (understandable, I did some silly stuff with power supply early on).
Where is this located
Read more…Apologies if this is the wrong place to post this question or if what I am asking seems a little silly.
I have a firefly6 tiltrotor airframe which came with modified MP software. I would like to switch to standard mission planner as I have been using
Read more…Hello
I am working on a quadcopter (plus frame). Everything seems to be right - the motors and props direction, connections, calibrations. Shows no error. Motors/props spin. But how much ever throttle I give, the drone wont take off. I dont think weig
Read more…Hello,
I have been building a program to to execute remote commands on the 3dr solo and was thinking it would be simply as easy as understanding mavlink which it turns out I am way off. There is udp traffic coming from UDP 5005,5501,5580, etc ports a
Read more…I have done a mapping mission, and I had to stop halfway to swap batteries.
This has caused me errors in the pic set when trying to geo reference them as I have two logs to run one batch of photos.
Is there a way to determine how many pics were taken i
Read more…Hello Everyone,
I am having trouble with my copter a few days ago, when I tried to test the failsafe feature of the copter.
I am using 4S 5200mah batter for my copter and my failsafe setting is battery voltage at 14V and RTL should be triggered when it
Read more…I'm running 30a Simonk firmware ESCs on a quad with genuine 3DR Pixhawk.
When I run ESC calibration (all at once) I run through the process in the ardupilot documentation.
When the throttle is up, I wait, but hear no tones at all. I'll wait for a good
Read more…Hello guys,
We newly released a 18x gimbal camera for multicopter task,like inspection,surveillance and mornitoring.
Features:
1)Only 1100 grams.
2)3 Axis gyro-stabilization
3)18X optical zoom
4)AV Signal,720p/60 video output
5)1080p/30 video streaming
Hi,
So this is my first time using pixhawk and mavproxy, and I am trying to do an autonomous flight indoors. This requires me to turnoff GPS. So I have removed my GPS from my pixhawk and disabled all checks, and set the GPS use to disabled using Miss
Read more…Hello guys,
I am building an FPV plane at the moment and want to do crop scouting with it. So I want to use telemtry to upload waypoints and edit the mission etc.
I installed the recent ArduPlane fw (V3.5.2) and calibrated the mandatory hardware. I bou
Read more…Hi all.
I'm doing a little project where I want to use a Raspberry Pi 2 to run a python script that sends MAVLINK commands to the Pixhawk where it takes off, flies between a couple of waypoints and at the last waypoint it switches to using a down-fac
Read more…These are accuracy questions really.
First - Voltage readout. Am using a 3DR pixhawk (genuine) with the 3DR power module.
Testing a 4000mAh 11.1V battery I'm reading 12.61V with a digital multi-meter, and Mission Planner is showing me 12.49V 99% char
Anyhelp? It is a mapping mission and I need to find how many pictures were taken.
Cheers,
Sandy
