Mission Planner will not load Beta Firmwares. It does say it received the list...
Mission Planner goes through and completes with the error message "Remote server not found (404)?
Anyone know a way around this...
Windows 10
I am connected to the intern
Read more…Hello,
I had a weird crash with my big camera X8 using 3.4-dev.
I had 4x 20min flights without any problem using 3.4-dev before. I used it because I needed the external Barometer...
I flew it in stabilize while suddenly it rolled to the left and crashed
Read more…hello all i just did up date in mission planer the up date went well
now i am missing a feature
i was able to swap from the tracker to the plane or quad using Ctrl X set the way points or control the unit then go back to the tracker using Ctrlx watch
Read more…Hi all sorry if this has been asked before but I'm a bit new to this.I have a hex setup and she flies lovely. I'm using a hyper spectral camera that needs a perticular speed which is 2ms but when I set speed in the mission planer section, draw the po
Read more…I am new to Pixhawk and PX4. Been flying 'standard' off the shelf drones until making the dive in DIY.
I have the 3DR Pixhawk using stock firmware. Its a Quadrotor. I can get into specifics of parts and such, but not yet clear if that is relevant y
Read more…Hey,
Thanks in advance.
so I'm building a flight controller with a arduino mega and its coming along nicely but i have run into a wall and wonder is someone could lend a hand as i've research for days on in and nothing has fixed my issue
First off the
Read more…Hello all,
I'm a new user so forgive me if I'm a moron for some element of the following question, but my issue is this: My Pixhawk seems to refuse to enter ESC calibration mode.
Background: I am building a flying wing UAV for mapping missions. I am
Read more…I looked but didn't see this posted anywhere. So this article about the drone crashing through a window was apparently a fabrication. https://skyvideo.wordpress.com/2016/04/10/huffington-post-lied-and-heres-the-proof/Huffington Post article http://m.
Read more…Hi everyone,
I am using pixhawk on my gas powered helicopter. I am planning to run some experiments on my helicopter. In these experiments, i am supposed to use a varying frequency, that is frequency sweep signals on each of the 4 control channels. i
Read more…Celebrate International Drone Day in Toronto!
Join us for "International Drone Day" in Toronto on Saturday May 7th from 10a-6p at the Vaughan Sportsplex II as FPV Racing Events and Autobotix host International Drone Day Festivities as the Official Tor
Not sure if this is the proper area to ask for some help but....
My APM 2.5 came up with "bad compass health error. When connected to my PC via MAvlink the compass appears to be working properly when I move it around. I tried another compass calibrati
Read more…Did you know that you can fly the courses of the Winter Barnburner Drone Racing Series presented by ReadyMadeRC, LLC in the comfort of your own home?
Series racer Quest FPV has recreated our authentic Fast, Big and Sweepy Courses and imported them int
Hi every body
does any body know the effect of loiter P gain in the flight and the way we can set and tune it?
thanks
Read more…I'm curious about laptop boot up for Mission Planner. I'm fortunate enough to have a couple spare laptops kicking around, so I want to use one for MP only.
I'm an amateur musician who has my own home recording studio and I use a dedicated laptop for
Read more… As you can tell from my profile I am new to the whole UAV/Drone thing ( Thought not to r/c) and loving my adventure.
I am also new to the concept of open source R/C.
Shockingly, I am also new to programming. Last time I programmed was using basic on a
Read more…Hi guys,
I have a Tarot X6 960 with 3DR Pixhawk FCU.
Until now, I made 3D mapping and orthophoto with a DJI Phantom 3 Professional, post-processing the images in Pix4D.
I would buy a camera to do mainly 3D mapping and orthophoto with the Tarot X6.
I just
Read more…I was looking on the 3DR website for a radio kit but I wasn't able to find one listed anymore. Does 3DR still make and sell radios for those of us who build our own drones? I sure hope they continue to do so into the future.
Read more…I have built my 2nd Skywalker, and running a Super 25 (excessive). 60A eFlite, 4S 4200, DSM2, but throttle response is off the charts - not sure of RPMs but this thing is scary sounding at even 1/2 throttle. Question is, is there any parameter that r
Read more…Hey guys -
I'm new to lighter-than-air flight (been working on planes for a bit) so I don't know the regulations behind them. I'm looking to both fly a lighter-than-air drone just for fun - however I'm looking to bring it into my research in the futu
Read more…Hello all,
I've been searching for quite awhile now, but haven't found the solution (yet).
I have a Hex with a PixHawk FC (running APM:Copter V3.3.3 Hexa) and a Taranis TX.
My landing gear is working all right this far:
With CH 8 on a 3 position switch,
