The Good Drone
I never saw this published here, but I think it is one hell of a good application.
Read more…
2 Replies
All Discussions (17281)
Sort by
Tail Servo
Curious if the Pixhawk can only support servos at 1520μs? When I look at most tail servos they are usually running at 760μs. Will the Pixhawk support 760μs? If not what Tail servo would you suggest? 900 size machine.
Read more…Another PixHawk Problem
Hello Everyone,
I have had a problem with one of my Y6 motors dropping out midflight. I had purchased a Y6 Kit from diydrones and am running a PixHawk flight controller. It seems to be an intermittent problem however has happened several times and app
Read more…APM 2.5 User Manual
Hello:
I am a new member here and I hope someone can help me out.
I just purchased the Aerosky APM 2.5 upgrade kit with GPS compass and all cables etc.
This all came from Hobbypartz.com.
Only one problem.
I did not receive any sort of user manual on how
3DR Tarot T-2D Gimbal vs HK Tarot T-2D Gimbal
Hi all,
My question is simple, what is the difference between the 3DR Tarot T-2D Gimbal and the HK Tarot T-2D Gimbal?
HK sells is for 145$, while 3DR's is 220$...
Is is a matter of loaded firmware?
I'm planning using one of them with a 3DR Iris+. Any th
Read more…Callibrate ESC APM 2.6 FAIL
I've used the "all at once" (https://www.youtube.com/watch?v=gYoknRObfOg&feature=youtu.be) ESC calibration. But once I turn my quadcopter back on, the quadcopter motor don't respond.
Read more…Just can't get yaw to work
Ok, so need some assistance with tuning yaw - see the attached vid (you won't need to watch more than a minute or two to see the problem. You can ignore the pitch issues which I'm addressing via the gimbal PID's.
Basically, I can't get the damned thin
Read more…3DR confirmed a known Telemetry ""BUG"" in mission planner Today ""Copter"" Pixhawk. Help thanks
I just got off the phone with 3DR today and 3DR confirmed a known telemetry bug in Mission planner today. This is the issue I told them I am having.
First off I would like to clarify a few things.
My testing included two computers.
1st PC is a Panasoni
Read more…Help setting up Ublox M8Q
I bought this to connect to my genuine 3DR pixhawk.
http://www.csgshop.com/product.php?id_product=171
The green power led lights up and after a minute or so the fix led light starts to blink but the pixhwk never see's it. I can't find any documentation
Read more…Quad falls suddenly
I have two quads with the same problem and entirely different hardware.
F450, 2830's, Full size APM, 10x4, BEC, 3.15, X, baro covered, (ESC, Radio, Acel and Compass cal'ed)
Blackout mini H, 1806, min Apm, 5x3, BEC, 3.15.X, baro covered,(ESC, Radio, Ac
Read more…I Just Want to Know when I can mess with this.
Just found this on the Erle Robotics site:
http://erlerobot.com/blog/tienda/pxf-bbb/
Read more…arducopter flight controllers
I am currently using a Pixhawk flight controller, but I am building a 250 mini quad and would like something smaller and cheaper. I am not going to do autonomous mission and don't need a GPS, but I would like to ability to add one later.
Are there ot
Read more…250 mini quad - motors for soft proformance
I am building a 250 mini quad for my nephew, and I am trying to decide on motors. I am NOT looking to build a quick agile racer, I'm looking for more of a slow easy to fly quad.
Would there be any difference in ease of flying between 1900KV & 2300K
Read more…RFD 900
How to connect the RFD 900 into the APM , just now i brought from the australia store but i dont know how to connect into the apm please sort me out anybody
In apm Wiki i didnt get any thing about RFD 900
Thanks for All
Yuvi
Read more…Unstable wobble in Loiter
I could use some help resolving stability issues while in loiter. I set up my heavy quad using Auto Tune. While trying to test Loiter stability my quad started to loose control. I tried to keep it in Loiter as much as possible. When it began to loose
Read more…Will this H-Frame Hexacopter layout work with APM2?
Hi,
Just wanting to confirm whether this frame layout will run OK with arducopter before I commit to building it, I don't see why it shouldn't work as a circular hex frame firmware considering the motor placement.
Anyway please let me know what you thi
Read more…Sudden TX connection lost from 2 meters away, a minute later my quad dropped from the sky!
Hi everybody! Something weird happened today.
For everybody not familiar with the Turnigy 9x, it does not have any failsafe. If you turn off the transmitter in the middle of a flight, the receiver will just kind of "freeze". It wont put throttle to 0
Five days since the order shipped and still no tracking number
Hello, DIYDrones!
I was hoping that my first post here would concern something less down to earth... But I'm facing a problem with a certain web shop so I thought I'd ask people who are more experienced in buying stuff over the Internet.
I placed two o
Read more…arduplane "off the shelf"
so I'm sure there's gotta be a way to do it but can anyone point me in the right direction to find out how to set up arduplane using off-the-shelf components?I have an Arduino Mega 2560 a whole mess of different sensors including several different GP
Read more…