Greetings,
We would like to inform you that our company recently launched large-scale 3D printing services through Indiegogo, which can be used to order custom designed drone parts. We have developed the large-scale 3D printing platform and correspond
Read more…Ok, so this will be my first arduino and raspberry pi build of a drone, although I am actually trying to figure out the best way to do this and I'm planning to start with a fixed wing first. I picked upma decent motor and esc and i have all the servo
Read more…Hello,
I have been always active in fixed wing.
One of my friends asked me to look in, the chances a quadcopter can survive a defect engine, or motor controller ?
The Frame should carry a 5kg sensor package, so, we are talking about a pretty heavy machi
We are trying to get a Hexacopter (Tarot X6 frame) with a Pixhawk Cube Orange+, Arducopter v4.5.1, Castle Creations DMR 30/40 ESCs and Tarot 5008 KV:340 motors, 18in CF props, in flight condition.
The only thing that is non-standard, is we have a 2 ½
Read more…One of the most important rules before we flying is kp index drone
Hello,
I have got a Pixhawk Flight controller board. All I am looking further is to use simulation with Pixhawk. I no nothing about Gazebo or any other simulation.
I want to learn simulation with Pixhawk. Can anyone help me out with where to start from
Hi
I am building new copter based on pixhawk 2.1 and here+ gps. It will be quite big octo but for now it’s quad with 15" propellers. I have mission planner 1.3.52 and copter firmware 3.5.5. When I am connected to mission planner from time to time I g
Hi,
If this is the wrong place to put this please redirect me to the proper board. My issue is trying to configure the control surfaces from the pixracer to the mission planner software (Qgroundcontrol). The servos are being hooked up to channels 1 a
Read more…Does anyone know the manufacturer of this drone?
I'd appreciate weblinks to the company.
Thanks for your help.
A new and improved version of the hands-on Arduino DIY flight controller for ESP32 / RP2040 / STM32 is available.
madflight is now an Arduino library and can be installed directly from the library section in the Arduino IDE.
Read more…Hello friends Diy Drones,I got a new GPS Kit Ublox and did the installation but the ArduStation stopped working.I made the necessary changes in line 1-7 to uBlox as follows:/ / 1-7# define GPS_PROTOCOL 2 / / 0 = NMEA, SIRF = 1, 2 = uBlox, Choose prot
Read more…I took my Tarot 650 Sport quad out for a test flight today. It seemed to fly okay though yaw control is very quick and I need some practice holding the same altitude. After a minute or so of flying I switched flight modes to RTL. The aircraft flew to
Read more…The drift rate on internal gyros has been reduced since the first generation Pixhawk, and the extended Kalman filter has been improved. How has this effected the ability of a plane to follow routes? How often does it need GPS in order to keep flying
Read more…The maiden flight of my Tarot Sport didn't go well. It was very unstable and ended in a hard landing causing some minor damage. I recorded the flight with the onboard GoPro and upon reviewing the video I could see that there was significant jello eff
Read more…I have pretty much completed the build of my Tarot Sport Quad:
This has been the most troublesome build I have ever undertaken. Aside from mistakes I made, false assumptions, buying some used equipment online that didn't work for me, I had quite a num
Read more…First of all, choose an light drone frame is very important.
The load capacity , wheelbase and drone arm diameter of the frame will decide the motors, propellers and battery models.
Therefore, it is necessary to understand the parameters of the frame i
After thousands of lost dollars and fly away copters I'm done with the Pixhawk flight controllers tottal wast of money more time fixing it then flying
Read more…https://youtu.be/AH6dWjI4TMc?si=IGIgBT963cxNjCZK
60mins with 2kgs is enough for use.
Read more…
FXT FPV Accessories prime day discount :
FXT T80 FPV camera: 10%off
product link: https://www.amazon.com/dp/B07B8FMTPY
FXT T81 FPV camera:10%off
product link: https://www.amazon.com/dp/B07B9T7W5G
FXT Viper FPV Goggles video galsses :10%off
product link:
Read more…