Is there a hardware or software solution to enable the use of a fail-safe with a 72mhz PWM system?
I have a Futaba 7C 72mhz transmitter, the radio can operate in either PPM or PCM mode. The fail-safe function only works in PCM mode. As I understand i
Currently I have a Jetv3 brushless with the motor mound that comes with it from graysonhobby.com...... But the metal cross motor mount has 2 arms broken off now. Any suggestions?"
Read more…Hi,
I buyed the Venus GPS Modul. I tried it with a Duemilanove without the Atmega Chip and it works.
But then I tried it with the Atmega and the TinyGPS Library Example but nothing happened. When I tried the GPS without Chip, the Nav Led flashes after
Hello,
ArduIMU Test does not run under windows 7 starter ???
Best regards
Hello everyone,
I'm a beginner in the UAV and going to buy my first rc modelaircraft to take aerial photographs. I've read onthe forum the purest strains of the basic UAV, but not yet found a rcmodel airplane that fits.
I'll take aerialphotographs of l
Hi everybody.
I am new to this community. I am from France, and I am building robots as a hobby.
I have just begun a new project called “BOB4”, which will be my 4th robot. (my previous robot can be viewed HERE). The hardware of BOB4 is ready and teste
Read more…Being new to the sport, I noticed the prop on my JM 6x4 hasn't the same size hole as my Turnigy B2835-2200. What is the best way to mount this thing without buying an adapter and waiting for shipping?
Has anyone specifically in the US tried this video system by BEVRC?
http://www.bevrc.com/bev-13g-800mw-p-52.html
Any input would be appreciated.
Read more…Give me some ideas for Multiplexer.How can start with elelctronics.
thanks.
PS. give me some links.
i would just like to send only pitch angle data from arduimu to another arduino
my understanding of code is poor
i would like to know which of the following pieces of code i need to load onto the imu board to achieve this task?
which piece of code do
Read more…I am just starting out (in the planning stage) with UAV and FPV flying. I have been looking around at the equipment I would need and I have run into one conundrum: I need a transmitter/receiver pair for control, telemetry, and video. From what I have
Read more…I have 2.4Ghz RC and 900Mhz Xbee. I'm looking for something below the 1000Mhz range to allow more distance, sacrificing quality.
Read more…Hi guys,
I always knew that rapid prototyping has a big role to play in the future of next generation UAV,s . Here is a link to a company using Stratasys FDM technology to make gimbal mounted video cameras......I can't wait to see the first complete
Read more…I've decided to build a UAV from scratch using thermopiles to determine attitude. I already have an xy sensor from FMA, but I don't have a z sensor. I do have two thermopiles to use. I'd rather not calibrate every time I want to fly or risk weathe
Read more…hello, i need help on arduino pro mini microcontroller- 3.3v/ 8 Mhz.
can anyone please help me to tell me the function, detail of the microcontroller.
tell me about the analog to digital function.
thanks
I just finished up some initial flight tests using the ArduIMU+ V2 in my Skywalker airframe.
This was my first flight tests using IMU stabilization insteed of thermopile sensors. After some PID adjustment I have nice and stable stabilization of the ai
Ok I have been working on a design for an airframe for my UAV. But, I have an opprtunity to purchase a Parkzone Radian RTF.
Any opinions on if that would be suitable for a UAV? I know the prop is up front, but I think for my use, I can work around tha
I've got maybe a stupid question...
Dear all,
I am researching flight dynamic for coupling control(lateral and longitudinal control) using AeroSim software.
I can handle decoupling control for UAV.I u need I can help u.Ready .
May I know how to consider the inertia effect for UAV airpla
