Hi,I'm interested in setting up an ad hoc wireless network of cameras for an event. Some would be in rc airplanes and some would be on the ground. Ideally, I'd like to have each camera function as an ad hoc node on the network (i.e. propagate signals
Read more…For various personal amusement and search and rescue applications, I am looking for an airframe that has a reasonably long flying time, something on the order of 1-4 hours, with bonus points for higher :)I want something easily portable, fast to set
Read more…Hi every one. i am new to here, i an using the latest 1.0 code, FMA and EM-406GPS,when switching on the AP, it does not go where it should be, when i set it to RTL is fly-away.Same as the way point..Try to set the yaw rev, but still no luck.. doing t
Read more…Hi!I would like to make an autonomous helicopter. I've heard that planes are easier, so I can't decide... I have never flown a heli or a plane before. I have 800 dollars, what's the best uav setup for me? (Note: I'm an absolute beginner and I really
Read more…Hi allSince losing all my kit in an accident last year and being away ive decided to start again and all i can say is its moved on a bit from rcap2:-)Anyway my new aircraft are a 62" dh beaver from kit and a 110" pzl wilga from plans and im going to
Read more…I am a graduate student and I plan on conducting research with the aid of a r/c plane mounted with a live-feed video camera. Pilot would be flying line-of-sight while another individual used the monitor and camera. This would be in military and publi
Read more…Does anyone know if gps ground speed data is purely 2D or can it compensate for changes in altitude ?ie... if a plane was flying in still air and it was in a 45 deg dive @ 30 knots airspeed , would the gps speed register 15 knots or 30?
Read more…There hasbeen increasing discussion of application of the UAV Dev Board IMU approach to CCPM RC Helicopters. Bill and I thought it would be useful to start a thread on this specific topic and see what interest there might be.
My particular interest is
ArduPilot handles drone stabilization when the ap is engaged. Do we lose stabilization when we need to turn off the ap to land or fly manual?
Read more…Hello guys,this is my first thread or discussion and I would like to introduce myself first.i graduated 3 years ago with a bachelor degree in aerospace engineering, my final design project was a UAV, but it was only the airframe and structure itself
Read more…Im a final year aerospace engineering student at the University of Manchester and am researching into systems for a UAV. Im after a magnetometer for the detection of anomalies really rather than navigation but am struggling to find anything, ive stum
Read more…Hey guys,Im new to this site but not to the Radio control world. Ive been flying radio control planes for over 10 years and compete on a weekly basis in the south in both freestyle and IMAC competitions. I have vast knowledge of the radio world and c
Read more…I am completly new and of course need guidance.I wish to build a directional antenna that ties into a gyro. I would like it to keep an antenna in a fixed direction using the input from my gyro. This would be for a ground based internet uplink from a
Read more…Quick introduction first: My name is Brian Mills and I've been employed in the commercial flight sim industry for 8+ years.Recently I've been working on an S-Function that integrates JSBSim (the default flight dynamic model for FlightGear open source
Read more…Hi,are there complete plans to build the white jet shown on the Main page of the site?
Read more…Hello,For those of you that have successfully used the ArduPilot in an RC truck or car, have you used the basic ArduPilot 1.0 code and, if so, was it heavily modified from the code used to control airplanes? I'm just getting started on controlling my
Read more…I'm currently deployed to Iraq with the Marines, and since the war is winding down here I'm finding much more time on my hands than the last trip I took over here. The other day I helped one of our intel guys preflight our Raven UAV's and I'm really
Read more…Here is my code for the Parallax Propeller CPU using the guts of a Wii nun chuck as the accelerometer.The code is modified from Paul Huber's to use the nun chuck data.For a $15 accelerometer it works nice. Still worling on project.
Read more…Does anyone have any experience building/flying Tom Hunt's Vertigo VTOL?It has the potential of a neat UAV platform.Here's a video of it flying: http://youtube.com/watch?v=bCJ70Fr1umAGood review of it here also: http://www.rcgroups.com/forums/showthr
Read more…I am currently studying Aerospace Engineering at the University of Manchester, England,UK. One of my final year projects is to implement and integrate the communication systems onboard a rotary wing UAV (tumbleweed if you want to google it) (2kg payl
Read more…