3DR works great with mission planner MAV 1.0 and with Qgroundcontrol but I can not get to connect to Happykillmore CGS. Is it a different baud rate? I have went over all the wiki and can not find any answers. Please any help would be great...Cheers
Read more…Hi Arduplane Users,
Seeking some help if anyone has experienced this problem before with their APM.
We are currently using APM 2.5 on a Skywalker 1880. Its flashed with 2.40 firmware as we had some custom code changes to trigger camera and also log hea
Read more…Hi all,
I'm trying to connect my STM32 based autopilot with the APM mission planner 1.2.22 Mav 1.0, with a pair of 3D Robotics 433 MHz radios, without success.
The APM recognizes the heartbeat messages sent by the autopilot but doesn't complete the con
Read more…
Primarily going to use the RTH and Stability functionality of APM2.5 for FPV purposes in my new Bixler 2, but will eventually build a more suitable UAV airframe for ground mapping
Read more…Hi Guys, I just want to share what happened to my team a while ago at the field. We just installed the airspeed sensor the previous night. When we tried to connect via 3DR, it hangs at this part of the parametersWe tried several reboots, reflashes to
Hi guys,
My team and I are assembling a Skywalker FPV with APM 2.5 and we have a little issue with the throttle on boot up. Upon initialization, the throttle range of the tx stick is changed, motor spins up to about 15% power although the throttle sti
Read more…Just thought I'd show some pictures of my new Bixler 2 FPV build. Had a few FPV flights already and have just ordered APM2.5 so will be able to get stuck in to UAV uses soon. I would like to use this as an aerial mapping platform to create google ear
Read more…Need some input, for the pass few days I have been trying to figure out how to mount my APM2.0, wanted to mount at the front under the canopy but i will have my RC and FPV TX there so i cut the belly of my AXN to accommodation the APM2.0
My questio
Read more…Dear All..
My APM is working fine when it powered by USB cable from PC or laptop. but when I want to install it in our plane, there's always no GPS data. I've no idea why this is happening. since this problem appear, I haven't fly it yet.
the battery c
Read more…This has been discussed a bit here:
Self training PID is definitly th
Read more…Well, it is somewhat related to our pursuits !
I require 5x ERA-8SM+ amplifiers from Mini Circuits.
MOQ is 20 devices, not too bad, comes to just over $25, BUT the postage and handling to this end of the world is $100 !!!!!
Any kind soul over in the US
Read more…I noticed after the latest Ardupilot update that there is now an addiional check box in the hardware set-up but no explaination of what it does.
The Wiki shows a picture of the airspeed sensor with a box "Enable Airpeed". Now the Current Mission pla
Read more…Hey,
I got the HK RQ-4 and I'm about to order my first ArduPilot to put it in.
However, on the TX, I have now configured the plane with V-tail rudder/elevator and flaperons. In the ArduPlane manual, it shows only 2 configs, standard 4 channel and elevo
Read more…I received the latest version of the APM 2.5 board a few weeks ago. I have spent the last couple of weekends trying to set it up for a flying wing using the elevon setup. I have read and implemented the online tutorial for elevon setup several time
Read more…Hi! all
i can't connect APM planner 1.2.12 with Arduplane 2.60/3/5 (APM 1) in baud rate of 19200. It is normal at that baud rate or need something to fix. baud rate config is made through Arduino 1.0.1.
Read more…The videos referenced in the Arduplane wiki do not function. They are supposedly "private" Can anyone assist?
Read more…I would like to know if anybody has had any luck with using APM1 on a glider? I am currently working with the FAA to see if they will let me send a glider up with a weather balloon and get it to come back close to me were I could have control over i
Read more…Flying an APM1, Have had no problems in the past with it, but took it out for a wonderful spin this evening, and when I got back, switched over to CLI mode (torward the servos) and clicked on terminal in mission planner in order to d/l my log- it act
Read more…I have been searching for a complete list of error codes, LED Status, and terminal.
My APM2 no longer shows any signs of I/O, via 3DR radio or USB; both functioned up until today, this unit has not yet been taken into the field.
It is my belief that my
Hello people,
Posted here couple days ago regarding setting flaps more specifically crow flaps into APM2.5. Today after tinkering with the code finally a breakthrough.
I can set the innerboard surfaces flaps only with the outer board raising up when i
Read more…