Is there a way to get the same telemetry through the FPV kit as you can through the OSD?
Read more…Hey all,
Well unfortunately I had a mishap with my Iris+ today and it flipped during a landing. The tarot gimbal mount broke and I need to replace it. I did a little searching online but couldn't find a replacement for the mount. Does anyone know wher
Read more…For some reason my ESC stopped working. If i plug in a battery nothing. If i plug in a spare power module to my pixhawk everything lights up and i can connect via mavlink.
Where can I buy a replacement??
Read more…I am interested in 3D Mapping and Survey with the Iris+. I have a modified GoPro and Tarot gimbal. I need a solution for Geotagging images through this setup or a recommended alternative solution/camera. Any help would be great. I am using AgiSoft Ph
Read more…I have been looking for a way to mount my Nexus 7 on the TX, but haven't come up with anything for sure. RAM makes 1" ball mounts with 1/4-20 either male and female threads. I was wondering if I could replace the lanyard stud with one of those? Any o
Read more…I have noticed upon touchdown of the craft I hear to a greater or lesser degree a revving up of the
motors before idling down. I have gone to minimum throttle at 6" above ground and this still occurs.
I had a flipover recently due to this plus some li
Read more…I would like some feedback on my method for installing an Immersionrc 600mw 5.8GHz VTX on my Iris.
My concern is that installing it so close to the Pixhawk and Receiver that it may cause enough noise to either shorten the control range, or cause inter
Read more…Hi There,
I am measuring the temperature profile from ground to 100 meters.
At the moment I am using a data logger that records temperature altitude and humidity.
So far I have made all my flights by taking off and the doing a 3 meter loiter for a few s
Read more…Hi guys,
I recently had another crash with my Iris+. I was taking it for a short flight for about 3-5 minutes and everything was going fine. While hovering at about 50m a short distance from the RTL location, I noticed it kind of dropping and falling
Read more…I have a project that will require my Iris+ to takeoff and fly anywhere from 6000ft to 10000ft above sea level. The aircraft will only be about 300ft above the ground. I have run the numbers in ecalc and found that my required throttle will be over
Read more…I was out today setting up for an auto mission (checking altitude of some trees, planning angles, etc).
On my way in to tweak the mission I decided to have the Iris follow me. Now whenever I connect (using Droid planner on galaxy s4), I am no longer a
Read more…Does anyone have a recommendation for a 3-axis gimbal for an Iris+?
The only option I have found out there is the DYS 3 Axis. Are there any others that work with a GoPro Hero 4 Black?
Thanks, erik
p.s.
If someone who owns a DYS and an Iris sees this, I
Read more…After rigging my TX to hold both a black pearl (for FPV) and a smartphone (for Droid Planner), I think what makes more sense is to use a tripod. My intention is to:
Hey guys, really new here. I soldered on my connections to the 4in1 esc so that I can power my fpv transmitter and not use my gimbal power. I say that because I am no stranger to opening this sucker up. Has anyone with more experience inserted a Mini
Read more…Did one test flight of my upgraded Iris/Iris+. Before flying I recalibrated the ESC's and recalibrated the compass. Took off in STD mode and flew for about 2 minutes making sure everything was working OK. I then switched to Loiter and the controls
Read more…Aloha
I was flying my Iris+ today and it crashed. Someone looked at the log and said it potentially was a brownout. Anyone have any ideas?
Here are 2 clips that may help:
1) A weird drop in power I think
Read more…I'm finally getting around to upgrading my Iris to Iris+ and I having a problem with Mission Planner. When I open MP and click the Config/Tuning tab I don't see the Full Parameter List to install the new Iris+ settings. I connected the Iris with bo
Read more…Hi guys, I'm a beginner with the Iris+ and new to this group. I've got a new Iris+ and have had about 5-6 good flights so far. Today, I had it flip twice on me, dinging up the propellers a little bit. It seems to be flying ok now, but unsure of what
During my first few flights I noticed that I would lose telemetry on the radio when the aircraft was around 100ft in elevation and I was standing, not quite underneath, but in close proximity.
When I flew at lower altitudes and over 400ft away from th
Read more…