Gender
Male
About
Location
College Station, TX
About Me:
Aerospace Engineering Grad Student Hobbyist
Please tell us a bit about your UAV interest
i am interested in Aerobots (Aerial Robots).
Hometown:
College Station, TX
Activity Feed
"Thank you so much for your hardwork . It saved me so much time. Have you thought of building APM Power Module w/wout XT60 connectors ? I saw one in the DIY website, but it is in .skp or .kmz format. I use Solidworks, so they are not compatible. "
" I wrote this few days ago. It works in mine. Be careful, when the program is loading do not move the ardupilot. It needs to calibrate "
"// Sumit Pokhrel - yaw ,pitch and roll rate .//
#include <stdarg.h>#include <AP_Common.h>#include <AP_Progmem.h>#include <AP_HAL.h>#include <AP_HAL_AVR.h>#include <AP_HAL_AVR_SITL.h>#include <AP_HAL_Empty.h>#include <AP_Math.h>#include…"
#include <stdarg.h>#include <AP_Common.h>#include <AP_Progmem.h>#include <AP_HAL.h>#include <AP_HAL_AVR.h>#include <AP_HAL_AVR_SITL.h>#include <AP_HAL_Empty.h>#include <AP_Math.h>#include…"
"I have few questions. I would really be thankful if you could answer them:
1. What port number did you assign in PORT: By default it is 9090 ? But so far i remember my Ports are COM1,COM2,...,COM5.
2. In data type : there are…"
1. What port number did you assign in PORT: By default it is 9090 ? But so far i remember my Ports are COM1,COM2,...,COM5.
2. In data type : there are…"
"I am trying to do this using simulink/matlab .
http://www.mathworks.com/matlabcentral/fileexchange/39037-apm2-simu...
using this. You have to have Matlab 2012a or later. Follow the instructions carefully, there is a manual in pdf. i am still…"
http://www.mathworks.com/matlabcentral/fileexchange/39037-apm2-simu...
using this. You have to have Matlab 2012a or later. Follow the instructions carefully, there is a manual in pdf. i am still…"
"A question, how could we run APM planner and simulink at the same time ? Also how could we hook up Simulink Block with APM Planner software ? "
"i am looking for a similar help. I tried using http://www.mathworks.com/matlabcentral/fileexchange/39037-apm2-simu... got the compiling error, "The call to realtime_make_rtw_hook, during the after_make hook generated the following error: The…"
I have the problem with Ardupilot Mega 2.5 + . I have checked and rechecked everything and while compiling it still gives the same message. "The call to realtime_make_rtw_hook, during the after_make hook generated the following error: The build…
I am trying to run simulink Blocks on Ardupilot Mega 2.5 + . The Arduino IDE is included as part of the target install. The IDE includes a folder of standard files for compiling code. These files had to be modified for the simulink blockset. The two…
"Actually you are wrong. It measures the airspeed on the basis of ground speed and pressure. "
"Were you able to get all the sensor data from APM 2 ? "
"I have a APM 2.5 + . I can compile and run a file called airspeed.pde which measure airspeed. Just wondering, APM 2.5 + don't have an inbuilt pitot probe or any airspeed sensor like this
https://code.google.com/p/ardupilot-mega/wiki/Airspeed . How…"
https://code.google.com/p/ardupilot-mega/wiki/Airspeed . How…"
"How accurate is that ? Is it good enough for a descent quadrotor ? Another question, if i have more than octa(eight) rotors, the ardupilot is not enough to send the signals. Do you know what i can use ? "
