Gender
Male
About
Location
Oakville, Ontario
Activity Feed
"I am wondering if this is a type-o in this post?
NEW: Automatic Flip (Roll axis) is now enabled on Channel
What channel is it on?"
NEW: Automatic Flip (Roll axis) is now enabled on Channel
What channel is it on?"
I have just reciently been enjoying flying my quad (with a home built frame), and in the process of flying (rather replace flying with crashing), my frame is no longer flight worthy. I want to use this opertunity to upgrade to the "official" frame,…
"You'll only see outputs after you arm the motors.
Basically until the code is actually sending a signal to the outputs it won't show up in the planner.
Just remember, make sure you don't have the motors powered up (or have the props removed)…"
Basically until the code is actually sending a signal to the outputs it won't show up in the planner.
Just remember, make sure you don't have the motors powered up (or have the props removed)…"
"@Chris Anderson
MAVLink is the default GCS protocol, but it looks like it defaults to Port 1.
Looking at the code (at least the Beta1 zip file I downloaded yesterday), I think you'll still need the #define GCS_PORT 3 line in your APM_Config.h…"
MAVLink is the default GCS protocol, but it looks like it defaults to Port 1.
Looking at the code (at least the Beta1 zip file I downloaded yesterday), I think you'll still need the #define GCS_PORT 3 line in your APM_Config.h…"
"@Dan: The title of the post says its a GoPro HD.
@Max: Good lord thats STELAR. Some wicked video and amazing flying. Makes me want to get my quad in the air this weekend. And re-affirms that I want to get a Hero HD. Nice stuff. Very very cool.…"
@Max: Good lord thats STELAR. Some wicked video and amazing flying. Makes me want to get my quad in the air this weekend. And re-affirms that I want to get a Hero HD. Nice stuff. Very very cool.…"
"There are pins that you can use that aren't taken up by other bits of hardware (in this case the relay). The ATMega 1280 analog pins are brough out to the holes on the IMU that are above the receiver wires. As well there are another pair (with power…"
"Mmmm. Soldering Pasta :-)"
"Any update on this? I'd love to make the little fix so the button works reliably.
chris."
chris."
"Ouch. I just ordered the adapter board and the GPS separately yesterday for more then the pair costs now. :-(
That sucks.
chris."
That sucks.
chris."
"Ahh good to know. Thanks for clearing this up. I had noticed it, but it wasn't high on my priority list to deal with.
I'll be curious to see the fix when its posted.
chris."
I'll be curious to see the fix when its posted.
chris."
"Looks like my board was one of the bad batch as well.
I have emailed Sparkfun for a RMA and will hopefully be getting it replaced.
Original Order details:
Ordered on 2010-06-03
Shipped on 2010-06-04
chris."
I have emailed Sparkfun for a RMA and will hopefully be getting it replaced.
Original Order details:
Ordered on 2010-06-03
Shipped on 2010-06-04
chris."
"Fantastic. Can't wait for my boards to show up. Looking really forward to converting my AeroQuad over to the new setup, and get to work on the iPhone Control app and the iPad ground station :-)
chris."
chris."
"If its this Cinelerra (http://cinelerra.org/) then its open source and runs on linux.
A good guide on how to use it for motion stabilization is here as well
http://crazedmuleproductions.blogspot.com/2009/03/motion-stabilizat...
I'll have to spin up…"
A good guide on how to use it for motion stabilization is here as well
http://crazedmuleproductions.blogspot.com/2009/03/motion-stabilizat...
I'll have to spin up…"
"What software did you use to create that helmet cam video? I assume its all made up of still images?"
"@Roy Brewer
Its just the iPhone side. Control API and Game API (really. That's their marketing plan? Strange).
They do list in the developer docs the API used to send control commands to the quad, but the examples come with a static library for…"
Its just the iPhone side. Control API and Game API (really. That's their marketing plan? Strange).
They do list in the developer docs the API used to send control commands to the quad, but the examples come with a static library for…"
"Chris, hit me up if you want. I can build the App for you and get you a bundle you can just install through iTunes.
I snagged the code from Parrot yesterday and have been messing with it (mostly to see if I can adapt for the AeroQuad project).…"
I snagged the code from Parrot yesterday and have been messing with it (mostly to see if I can adapt for the AeroQuad project).…"
