Gender
Male
About
About Me:
UAV enthusiast
Please tell us a bit about your UAV interest
www.miniplanes.net
Activity Feed
"i have the same issue with my setup, i wish it could be possible for a user to select a minimum and a maximum values for the rssi in the mission planner so anyone could use their diferent brand radios and have some reliability in the reading values.…"
"Hi, i had the same issue with mine when updated the planner to version 1.2.32, so i decided to re-install the ver. 1.2.30 , and problem resolved.
p.s - i haven´t tried yet with the latest ver. 1.2.33, so i can´t comment about it.
Gil"
p.s - i haven´t tried yet with the latest ver. 1.2.33, so i can´t comment about it.
Gil"
"I understand your problem, my Quad took by him self inside my garage, 10 minutes after i shutdown the transmitter and i did not disconected the Lipos on it, result... 2 broken props, luck me i wasn´t near it... Gil"
"Hi, same problem over here with my APM2 on my hexa and i´m using also 2.8.1 configuration (stabilize mode), also i noticed an unsual increasement of the rotation of the motors when i move the stick at 1/2 of the throttle, if i continue to move the…"
"nice work Luis, just what we APM2 users need !!!
@ Chris Anderson: hey Chris, its about time for portuguese speakers around the world (too many) that are using APM's, Planner, etc..., like L.Ramos and myself, to have an option for portuguese…"
@ Chris Anderson: hey Chris, its about time for portuguese speakers around the world (too many) that are using APM's, Planner, etc..., like L.Ramos and myself, to have an option for portuguese…"
"yes, it seems to me that it could be a problem with the voltage/current sensor board, in my opinion the planner should include some kind of adjustment setting to help people to adjust correctly the readings... perhaps they will do that in a near…"
hi all, after been using my APM2 board configured as a Quad-X configuration for a couple of days, i decided to add the voltage/current board that i´ve purchased from sparkfun and conected it as stated in the instructions in the Wiki area, selection…
"Hi guys, can anyone point me, how to connect the 6 motors on my hexacopter, the board is an APM2, also can´t find any info about the correct position for the propellers ! thanks
Gil"
Gil"
"Hi folks, updates concerning this issue are welcome, i´m looking for one pair of these in a near future.
Gil"
Gil"
"Hi folks, just ordered one APM2 board and still looking for the best ultrasonic sensor for it, but there is a great variety at DIY STORE, so i would like to know you wich one do you recommend ?
thanks
Gil"
thanks
Gil"
"hi everyone, is anyone here using one way telemetry comunication (downlink @ 38,4Kbps), instead of having bidirectional comunication ? anything in particular to look for within the AP comunication protocol ?
Gil"
Gil"
"Chris, thanks for reply !
cheers"
cheers"
"Hi guys, congrats to Michael Oborne in first place for this wondefull tool, my questions are...
1) Can it use diferent types of modems for telemetry or must be XBee only ?
2) For those who are using it at the moment, what would be the range…"
1) Can it use diferent types of modems for telemetry or must be XBee only ?
2) For those who are using it at the moment, what would be the range…"
"yes, off-line maps... there are many places without wireless network available, specially here where i live, so i use OZ Explorer and it´s efective, but i would like to start using your software but i´ll fell the lack of map navigation.
thanks"
thanks"
"Hi Happykillmore, is it possible to have the chance to load calibrated maps instead of using google earth, like OZ Eplorer uses.
thanks"
thanks"
Hi all, just wanted to share some pictures of my new plane and my own concept for the Easyglider, being my first approach to the foam materials i though i would give it a try and implement a new design for this type of planes.So i put my hands on…
