"Hi Forrest,
Regarding the problem some of us in the EU are having, here is the solution:
In the Get_Config_data, replace the line:
ElevationStartEndPrecision = Val(Sheets("File Config Data").Cells(RowCount, 2))
with
ElevationStartEndPrecision =…"

"AFAIK, the 3.4 is not in beta phase yet.
That's why it isn't showing in beta releases.
You can use the 3.4 dev with Ctrl-Q in MP and test it but as it is still changed by the devs, you could get a stable version on day and a buggy one on the other,…"

"Randy,
Every day in every extent I am learning something more.
Thank you for the graph and the explanation of the problem source.
I must confess I noticed it but didn't know how to interpret the sudden separation.
This one goes into my knowledge…"

"I am no log expert, but here are my 2C
Your vibration levels seem reasonable for me, so I don't think it's a vibration issue.
But when I checked you CTUN.ThrOut it has a mean value arround 510, and your THR_MID is set to 700.
So when you switch to…"

"Did you calibrated your ESC's after adding a new one?
It could be that the new ESC is out of sync with the others.
That would be the first thing I would do after changing one of the ESC's."

"As I'm a control freak :-) I always takeoff/land in stabilize.
But as I am mostly flying in highlands, before flying missions, as a SOP I always arm and takeoff in one of the GPS modes first, to make sure I have a good GPS lock"

"Dear James T Kirk,

I had some OT replays in this thread which were simply ignored, and I learned the lesson.
I am happily flying the 3.3 beta without any issues from RC9 up, with my setup, but some people did or do have problems, and I am pretty…"

"Agree about the software, if it only had thread tools, such as search within thread...
I also have the Tarot 650 sport and I never let the FC finish the land or RTL, I always switch to stabilize and land it by myself as it sometimes want's to tip…"

"Hi,

I don't have a STORM32 board, but, in case you missed it, there is a bug fix in 3.3 rc10 for STORM32 serial protocol driver."

"Hi guys,

Sorry if this is slightly off topic.
Just saw that the new Tarot T4-3D 3-axis gimbal is out.
As it has an SBUS input I am wondering if the Pixhawk SBUS out port is fully implemented in copter 3.3.
The wiki says it's not implemented yet,…"

"Thanks for the info (and your time). Great explanation.
I wish also it could make in the wiki, as it could prevent future crashes..."

"Hi leonardthall,

I'm trying to learn reading the logs, and I'm wondering: what info in this one shows that there is a sync issue?
Or even better, how can I now that one of the motors has a problem, sync or something else?
Thx"

"Probably not helpful, but my radio telemetry works fine on rc8.
It's working on telem1 as well as telem2.
Do you have something else connected in parallel with the telemetry radio with an Y cable?"

"Artem,

I think it would be nice if you give us a brief summary of the conversation in english.
As I (maybe false) understood there are two versions of Pixhack, one seems to be good an the other one has the vibes?"

"Interesting.
I had exactly the same problem with my first M8N combo.
It acted strangely, and I've got almost always inconsistent compasses warning.
The warning would occasionally went away, but I wasn't confident about it.
I thought it was a faulty…"

"You are right.
I have connected only the SDL/SCL/Ground wires from the compass to the I2C.
The power is coming from the GPS port."