About

Gender

Male


Location

Sabah


About Me:

Have been in the RC hobby for 20 years, mainly in airplane and helicopter, and recently multi rotor. Conservationdrones.org Asia team member


Please tell us a bit about your UAV interest

I am totally new in this field. Would like to start with the most simple form of FPV and ultimately would like to build a low cost UAV capable for long range low altitude air survey and petrol. 2013 update : A few Skywalker base UAV had build for aerial mapping purpose. Result is quite promising.


Hometown:

Sandakan


Activity Feed

keeyen pang commented on makeflyeasy's blog post Brother of the believer, the free began the test.
"Great. To do the modification, I think we need the wings extension, folding arm and maybe those motor mount. Can you provide those components? By the way, I speak and read Chinese : ) "
Aug 30, 2018
keeyen pang commented on makeflyeasy's blog post Brother of the believer, the free began the test.
"@makeflyeasy, I have a Believer on the way. Do you potentially interest to sell me one unit for testing? The range is just nice for our mapping project"
Aug 30, 2018
keeyen pang commented on makeflyeasy's blog post Brother of the believer, the free began the test.
"Hope Andrew can get it to the air soon. This modified Believer should perform better than Nimbus. I really don't like Nimbus's V tail servo arrangement. Unserviceable and subjected to dislocate. I have lost one because of this. "
Aug 30, 2018
keeyen pang commented on makeflyeasy's blog post Brother of the believer, the free began the test.
"It will be good if you can provide more info like where to buy, flight log ect.  Thanks"
Aug 25, 2018
keeyen pang commented on lot's blog post Dronecoria: Open Source Forest Restoration with Drones
"https://www.biocarbonengineering.com/ 
They are not open source but some good info there"
Feb 8, 2018
keeyen pang commented on Olivier's blog post 2017 Ardupilot Un-Conference Talks and field demonstrations, Andrew Tridgell, Paul Riseborough
"Cannot access from Malaysia too. HTTP ERROR 500."
Mar 23, 2017
keeyen pang commented on Emlid's blog post Event38 integrates Emlid Reach and starts providing ready-to-go PPK mapping solution.
"Thanks for the info. Am I safe to said that if I have the Reach and Reach RS, I can expect curaçao up to decimetre ?"
Feb 24, 2017
keeyen pang commented on Emlid's blog post Event38 integrates Emlid Reach and starts providing ready-to-go PPK mapping solution.
"Very impressive. From the study case, if we want cm accuracy, we still need to know the correct GPS location of the base station. Therefore a survey grade GPS receiver and correction service is needed. But I think it is far better than set up many…"
Feb 22, 2017
keeyen pang posted a discussion in Moderators
Hi dear moderators, Recently I notice there are some " pure " advertising post from Skywalker / TopXgun ect. Where some of the post being deleted some make it to the blog post. I'm not really sure if this type of " blog " have a place here or we…
Dec 16, 2016
keeyen pang commented on Martynas Ubartas's blog post Seagull #MAP-X from Seagull UAV !
"This Map X log a GPS data file. Are we going to use third party software such as Geosetter to geo tag those picture or can we use the Geo tag tool in Mission Planner ? "
Oct 21, 2016
keeyen pang commented on Kristaps Brass's blog post How To Move The Entire Route In UgCS
"I start trying to use this GCS software with DJI Woo Kong, I'm very surprise to find out that after mission completed, the drone stay at the last way point instead of RTH. Home location must be set manually. It is nice to be able to set manually as…"
Aug 24, 2016
keeyen pang commented on Andrew Tridgell's blog post APM:Plane 3.6.0 released
"Quadplane code not compatible with DJI E 600 tuned propulsion system ? I set up my quadranger with this latest 3.6 firmware, while bench test I notice at least one motor not turning or turn much slower then others. I've seen this behaviour with my…"
Jun 19, 2016
keeyen pang commented on Andrew Tridgell's blog post APM:Plane double release 3.5.3 and 3.6.0beta1
"As 3.6 is out now, I take the opportunity to see if the new firmware solve my problem. 
Before : Once I move my plane from out door to in door where GPS satellite drop to less then 5 or totally lost GPS, the artificial horizon become hey wire, as…"
Jun 12, 2016
keeyen pang commented on Andrew Tridgell's blog post APM:Plane 3.6.0 released
"I load the firmware and fly my MTD for 40 minutes or so. All great but I did not saw the mission grid line shown up in Flight Data screen. My Mission Planner is one version back from the latest."
Jun 11, 2016
keeyen pang commented on Randy's blog post Copter-3.4 beta testing starts
"This release include traditional heli. I really wish some one can up date the wiki and provide more info especially in the set up and tuning. I try with my old Trex 450 fly bar with APM 2.7. I manage to tune the rate P of all three axis. I can hover…"
May 31, 2016
keeyen pang commented on Andrew Tridgell's blog post APM:Plane double release 3.5.3 and 3.6.0beta1
"Dear Andrew
Can I know if any update info available or should I continue to ground my plane until further notice ? Thanks"
May 27, 2016
More…