About
Activity Feed
"Can this setup be implemented with the APM1? I tried figuring out which is the A9 in the APM board but not sure where it is :) Thanks."
"Any way to decrease the interval between voice prompting interval ... currently its 30 seconds, is there a way to make it 20s or 10s or any values for that matter? Thanks."
"Matt,
Is there a way to turn on a canon camera via chdk? I mean with all the dust circulating around at take off, camera should be off, when in the air, I want to turn it on, then after that use your instruction to take images, when about to land,…"
Is there a way to turn on a canon camera via chdk? I mean with all the dust circulating around at take off, camera should be off, when in the air, I want to turn it on, then after that use your instruction to take images, when about to land,…"
"Jeff,
Thanks for the reply.
I do have the old frame! My all up weight right now is 2kg and flying for 5 minutes with a 5000mah 3s battery. After everything cools down the battery voltage is around 11.3v.
So keeping the 12" prop and 880kv motors and…"
Thanks for the reply.
I do have the old frame! My all up weight right now is 2kg and flying for 5 minutes with a 5000mah 3s battery. After everything cools down the battery voltage is around 11.3v.
So keeping the 12" prop and 880kv motors and…"
"Jeff,
The 3kg+ all up weight is very enticing ... the propeller you used on the 880kv motor test involved an 11x47 apc prop ... However, I have stock up on the 12x47 so the question is, do you have an opinion on the impact of using the 12 propeller…"
The 3kg+ all up weight is very enticing ... the propeller you used on the 880kv motor test involved an 11x47 apc prop ... However, I have stock up on the 12x47 so the question is, do you have an opinion on the impact of using the 12 propeller…"
Hi!In Mission Planner, one can load do "Tlog > kml or Graph", then if you go to "Graph Log", there will be a bunch of variables to choose from after selecting a particular Tlog. If I chose roll, then the Mavlink Log Graph will update with the…
Hi I'd like to use the APM1 to log the tilting in the x and y axis of a moving vehicle (not the arducopter). I'd like to do this without attaching a receiver to it and not use the transmitter radio as well. However, I will be connecting the GPS, but…
"Mike have you by any chance finished "fast intervalometer" modified to start taking pictures after a delay and shutting off the camera before the plane lands? Mind sharing a link to the script. Thanks.
Comment by Mike on September 9, 2011 at 12:34pm…"
Comment by Mike on September 9, 2011 at 12:34pm…"
Hi! I have a bit of a loud noise when I start-up my hexa and upon examination looks like the outer barrel of the 880kv motor may have moved up creating a slack with the internal part of the motor.Not sure if I'm making sense but if you push down the…
Does it mean if I have 3s battery that I need to put in only three resistors?If I solder in all four supplied resistors, will it not affect the voltage reading of the APM?Thanks for any insights :)
I got a minimosd and the instruction found at the wiki shows the use of an independent battery to power both the camera and video/audio transmitter.Question: Can I use the main battery powering the arducopter to provide juice to the camera and…
I want to use a camera which is 5v as my eye in the sky. This camera will be hooked up to a MINIMOSD and then the video signal will be transmitted using a 9v video transmitter.The instruction for the MINIMOSD indicated the video camera and…
"u4eake,
I have made modifications to the IMU relay area to enable the low battery indicator by following your instruction. However, I'd like to disable the modifications for now and load the most recent code v49 from the v39 I've been using for a…"
I have made modifications to the IMU relay area to enable the low battery indicator by following your instruction. However, I'd like to disable the modifications for now and load the most recent code v49 from the v39 I've been using for a…"
