Gender
Male
About
Location
Campana, Buenos Aires
About Me:
I'm an Electronics engineer dedicated to R&D of industrial NDT equipment.
Please tell us a bit about your UAV interest
I'm just starting on the UAV field and RC planes. I would like to collaborate on the UAV auto pilot developments.
Hometown:
Las Flores - Buenos Aires
Activity Feed
"Hola Daniel y Martín, yo estoy en Campana(BsAs) y estoy trabajando en un par de aviones con APM para fotografía aérea."
"Follow the first-time setup here:
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
"Check on my response to a similar question here:
http://diydrones.com/forum/topics/how-to-confirm-the-rudder-respons...
Have a good flight!"
http://diydrones.com/forum/topics/how-to-confirm-the-rudder-respons...
Have a good flight!"
"Try creating an issue on the software repository on GitHub, Michael Oborne and the other devs actively answer there.
https://github.com/diydrones/MissionPlanner
Regards"
https://github.com/diydrones/MissionPlanner
Regards"
"You can power the RX receiver with that ESC and the power will go from it to the APM with the RC channels.
Remember to take JP1 out before splitting the power supply.
Cheers"
Remember to take JP1 out before splitting the power supply.
Cheers"
"Hi Marco, have you calibrated your radio inputs to APM after trimming in manual?
If not check here http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setup/
Cheers"
If not check here http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setup/
Cheers"
"Hi Zubair,
you could check it by moving your aileron's stick on your TX while in FBWA mode(with the plane leveled) and see if the appropiate mixing to the rudder is being applied for a coordinated turn, i.e: stick to the right moves ailerons…"
you could check it by moving your aileron's stick on your TX while in FBWA mode(with the plane leveled) and see if the appropiate mixing to the rudder is being applied for a coordinated turn, i.e: stick to the right moves ailerons…"
"Hi Dan, I guess you are speaking about a plane and in that case you will need at least 5 channels for the normal controls(aileron, elevator, throttle, rudder) + 1 channel to switch between flight modes.
You can read more about it here:…"
You can read more about it here:…"
Hi everyone, I wanted to share with you my first trials on tuning the APM on my airframe.I'm quite new to the hobby, just started flying on January this year with a brand new ARF Bixler and an APM 2.5. After learning how to fly in manual I…
"Hi Hein, do you have your radio channels calibrated after trimming?"
Hi all, I've been here for a while learning from the posts of the community and since January I'm making my first steps in the APM world.I've a quite simple setup composed of APM 2.5 + Mediatek GPS + 3DR 433Mhz telemetry(both antennas have a red dot…
"I had the same problem with my APM 2.5 and, after contacting with 3DR support, I have to go for an RMA. I would suggest you to contact directly with them.
An interesting question is of there is some manufacturing issues with the boards, it does not…"
An interesting question is of there is some manufacturing issues with the boards, it does not…"
"Hola a todos, me presento siguiendo la sugerencia de Facundo.
Soy de Argentina (Provincia de Buenos Aires) y estoy comenzando el desarrollo de UAVs para diversos usos, entre ellos la fotografía aérea. Espero poder contarles pronto de mis avances."
Soy de Argentina (Provincia de Buenos Aires) y estoy comenzando el desarrollo de UAVs para diversos usos, entre ellos la fotografía aérea. Espero poder contarles pronto de mis avances."
"Hi all, I'm a newbie on the community writing from Argentina. A couple of weeks ago I've ordered by very first APM 2.5.
I have a similar behavior to the one described here. I'm able to upload the latest ArduPlane firmware(2.65) and access through…"
I have a similar behavior to the one described here. I'm able to upload the latest ArduPlane firmware(2.65) and access through…"
"Hi everybody, I'm really new to UAV and have plans to start using ArduPlane. I have been looking at the Wiki and Manual and could not find much about the stabilization algorithms in use on ArduPilot. Can anybody help? Thanks"
