So, my first need to geotag.. Images and I thought all was fine until problems with post processing... then I notice each photo has the same exact GPS Data in its file properties...
captured with a cheaper action camera, I set the time within 1 second
Read more…Hi Guys,
I am trying to get a LV-MaxSonar EZ0 MB1000 Sonar module working with a Pixhawk. I have connected the sonar using the 3 wires according to the ArduCopter documentation to the 5 pin ADC port. I have the ticking noise coming from the sensor wh
Read more…Hi,
I am new to Ardupilot, I want to develop android app to control drone. As a initial step i want to send waypoints(mission) from android app to QGroundControl software and check QGroundControl received the waypoints.
Using below softwares
- Ubuntu 16
Hello
i`m trying to implement a Sony A6000 camera with an IR cable from (tuffwinghttp://www.tuffwing.com/support/Tuffwing_trigger_sony_nex_IR_pixhawk.html) to Pixhawk.
It`s not working?
Connected it to (RC10 AUX2)
Settings as follows in attached pictures
Read more…Hi all,
I need a gimbal to fit the device in the image below. Do you have any suggestions for something that can be customized?
The frame will probably be a Tarot FY680 (however a bigger one might be a possibility as well). Total length: 195 mm.
Read more…Hello Everyone,This is also my first post in the forum. I want to make a custom PDB board out of a 2mm 20x20cm copper plate. One part will be the positive plate and another the ground plate according to maximum current ratings of the system. I am thi
Read more…Hi all,
I was working on a S1000 & Pixhawk 2.1 build and unfortunately I had a massive failure/crash on the first flight. The drone was without any payload, and it seemed like everything should go fine. I was ready to perform the Autotune procedures b
Read more…I've started flying a Quadcopter (X configuration) with a Pixhawk 2.4.8 with a UBlox m8n GPS, without any big issues apart from the ones connected to the fact that I'm complete newbie on RC.
Anyway, some days ago I was experimenting some custom firmwa
Read more…Hola buen dia! Soy Daniel de Santa Fe, Argentina. Estoy buscando la posibilidad de poder armar un Drone que levante entre 15 y 20 kg en total. La idea mia es armar la plataforma yo (tengo que ver que parametros tener para la misma que tampoco se) y c
Read more…Hello everybody new around here and as an electrical and mechanical engineer I'd like to get engaged in the development of the pixhawk so am just getting to it and it'd be lovely to get some tips an explanations on the design featues (internally) of
Read more…i have to design a 2axis gimbal for mav.payload capacity is 200grams.can anyone suggest me what components will be needed?
Read more…2 / 2aerodimHello to all of you!kindly request your help in my problem, which after so many search and readings ....unfortunately i can't found any solution!!!The point is that i'm very new to APM and PIXHAWK controllers and because of that, most pro
Read more…Hey guys,
Just wondering if anyone can build me custom made hexacopter capable of lifting up to 20-25KG load. Please let me know if you have any proposals.
Thanks
Read more…Hello,
I'm a student competing in the First Tech Challenge for 2017-2018. For this years competition, I'm investigating the possibility of creating a robot capable of flight, in the form of a quad/multi-copter. However, I am not quite sure whether
Read more…Hi,
I have seen a lot of errors in my mission planner before and during my flight test.
Please, i need help for someone to explain to me what is error below means and what to do if we see the error?
Bad AHRS
Error velocity Variance
EKF (yellow warning si
Dear all,
I got a new Radiolink Pixhawk flight controller and
use Radiolink R9DS as RX on it.
But when i am trying to make radio lalibration on Mission Planer , i cant do it.
When i am playing pith and yaw on transmitter , i can see different
reacti
I've started flying a Quadcopter (X configuration) with a Pixhawk 2.4.8 with a UBlox m8n GPS, without any big issues apart from the ones connected to the fact that I'm complete newbie on RC.
Anyway, some days ago I was experimenting some custom firmwa
Read more…I have just received all of the parts for my hexacopter build.I'm using a pixhawk FC and taranis X9D transmitter.I was able to bind my Taranis to the X4R rx the light goes green. But after this point I'm not sure what to do I have researched extensiv
Read more…I've started flying a Quadcopter (X configuration) with a Pixhawk 2.4.8 with a UBlox m8n GPS, without any big issues apart from the ones connected to the fact that I'm complete newbie on RC.
Anyway, some days ago I was experimenting some custom firmwa
Read more…