Hello:
hey guys,
i was wondering how you design a plane that is balanced and all that neccesary stuff. if anyone could show me how, that would be great.
Read more…Images of Haier 7" widescreen hdtv while testing screen layout and GPS with 2.4 ghz video tx RF isolation.
With a view to maximising the available processor power (cycles) available for further enhancements of the algorithms used in ArduPilot I am always on the look out for ways to improve the efficiency of the code.
Unfortunately the standard Arduino soft
Read more…Since the twin booms seem to be the way to go, and I was wanting a payload plane anyway, I decided to build a twin boom. This is 100% scratchbuilt, even the wing. I gave it an RC only maiden flight this morning, and it flew like a dream. Highly s
Read more…I had this idea a a while ago and made some concept renderings and an animation, what do you think?
Sycamore Drone
http://www.solvengineer.com/dronepage.html
hey guys, i was wondering if i should add a static camera under the wing or to make a pan/tilt cam . if i do do a pan/tilt cam, then would it be automatic or controlled by r/c?
Hello. I am currently trying to configure my UBLOX for use with ArduPilot and cannot figure out what exactly is the problem. I found the instructions for configuring UBLOX but cannot seem to get data sent from the GPS unit. The reason I need to do
Read more…hey a while ago i read about a quadricopter controlled by the accelerometer in an iphone. anyone have any ideas of how to diy this?
Read more…Although I've been monitoring this website for a couple of years, I've refrained from joining because I simply don't have much time to participate in these projects. Here's a major problem of mine which I need to overcome and the problem involves cre
Read more…I know a lot of us try to extend the range of our links with better antennas, more power, etc., but why not try to extend the range by putting our antennas up higher?
hey yall,
i need help with making my first UAV. i have almost no clue how. i have some experience with rc planes and i can fly those rather well...now i want to move on to UAVs. what's a good plane for a first UAV?
Read more…Hi all.
I know that i'm new here, and in this area even greener.
I have 2 ArduPilot bords and 2 EM-406 GPS. I was wondering what could I do with a spare board and GPS...
Would it be possible to interface the second GPS on the ground station and compare the ground station's GPS position to the UAV's GPS position ??
Hi guys,
I have been making rapid prototypes in plastic plated with a layer of nickel all over the part, the reason for doing this was to improve the material properties of the plastic to make it stiffer and stronger. I also wondered if this could be
Read more…Hi dear members of Diydrones. Im interested in this address and forum for a long time. I have read some of your posts and articles. For my final project i decided to built an UAV, and my instructor accepted it.The problem is i have never deal with ai
Read more…I have seen the extended guide on building an ArduPilot but how does the ArduIMU differ. I've looked up IMUs and they seem to work using accelerometers and gyros. Doesn't the ArduPilot already do this? I got interested in ArduIMU after watching a tal
Read more…Hello, I am having a problem figuring out how to set my three position switch on my transmitter to turn on and off the auto pilot. The transmitter is a DX7 and the receiver is an AR9100 spektrum. Can anyone point me in the right direction on the setu
Read more…