Hi all,
This may seem like a really basic problem, and no doubt many of you will be telling me that i have set things up wrongly. I have been through the wiki about 8 times checking, double checking and octi-checking every parameter i can think of, bu
Read more…throtel aircraft work correctly in manual mode but when change mode to auto mode the throtel low please can help me
Read more…I am a electronics professional.with 6 years of exp .I am interested in learning to design and develop my own quadcopter,I am quite familar with microcontroller programming (C program),the electronic hardware .I would like someone to help me whic
Read more…I need help (please) setting up connection between an Arducopter 2.8, an RCtimer bluetooth module, and an Android tablet running 4.4.2. I would like to plan and fly simple "missions" using the tablet only as the interface for mission planning - no ne
Read more…I have been trying to change the "P" in the altitude section but for some reason it will not change. Right now its 1.000 and I was going to change it to 1.2 or 1.3 but when I change the setting and click write parameters it returns back to the 1.000.
Read more…Had an interesting event happen the other day. While flying in auto on a mapping mission, the copter (an s900, pixhawk, AC3.2.1) did some unanticipated roll movements during a turn at a way point. It proceeded straight along the flight plan as plan
Read more…Hi All,
I want to be able to use the SET_POSITION_TARGET_GLOBAL_INT MAV link message to control my Hexacopter's velocity/ location with a secondary on-board controller. The idea of this being that I can then play around with code on a more powerful pl
Read more…Hi all,
I thought others might be interested: On Monday we flew a selection of quads and hexicopters in the path of an X-Band weather radar in order to determine whether the radar could see them and if so, how well.
We flew two 3DRobotics IRIS+ quads
Read more…I have two MinimOSD boards purchased from 3DR that no longer talk to ArduOSD (failed to talk to bootlogger issue). While I found links to fix this issue, it is no help if each time I plug it into Pixhawk it works once then bricks again.
Below is summ
Read more…I'm using a APM 2.6 in a "Relentless" power cat. I would like to change the failsafe of loss of radio signal to RTL. Currently the default setting is "HOLD" which is rather unhelpful when the boat is on the other side of the bay.
Any help is much app
Read more…The wiki provides no information on setting up and using an alexmos gimbal with serial output. I have a gimbal that I can control with servo inputs and RC Passthrough, but, the issue is when it gives the PWM output as a servo it keeps that PWM Value
Read more…Hi everyone,
Sorry if i ask a very basic question, I'm a electrical engineering student but I'm really newbie in drones. Recently I felt in love with quad-copters, so sorry guys if I'm a little newbie here.
I would like to know how I could program
Read more…I damaged the red pushbutton switch on my Pixhawk build today.
I called 3DR to order a new one, and I learned that they don't sell the switch any more, unless you buy a complete Pixhawk kit to get a switch. I gather that when as they sell out the misc
Read more…issue:
Calbrating the acelerometers in PIXHAWK... stepping through laying it on it's side etc.... MP has started skipping steps so cal fails
I've reloaded MP as well as firmware in the Pixhawk. this worked when I first arted messing with MP and this
Read more…Hi Some one who knows please tells me. In the field, there are 24 photos taken by a airplane UAV Ravee. However,the software can capture for only 17 photos. Why the number of photo are different ? and How could i fix it?
thank you
Read more…Hola amigos les presento mi trabajo de diseño con mi Robocat 500, con las siguientes caracteristicas:
Hello friends present my design work with my Robocat 500, with the following characteristics:
Motores 650 Kv
ESC 40 Amp 2 a 6 seldas
Helices 12x4.5 carb
Read more…Been flying RC for several years and Multirotors for 3. I have read a lot of post where when people say flight performance change when they fly over water. I have thought about this and I remember one thing my flight instructor taught me about landin
During rc calibration, it shows that the rc bars move with stick input. However, the control surfaces don't move. For some reason I can't get the surfaces to respond to any inputs. Please let me know what I am doing wrong. This is a fresh install of
Read more…Hi guys, hope someone can point me about that.
Cant say how it performs in wind. Hovering in calm day it does fine but If I pust FF or any direction and want just to stop It´s is supposed it remembers the point at the momment the stick were centered
Read more…