Hey there, I'm trying to build a small rover that will weigh less than 5kg.
I'm trying to go super cheap for this first one.
I currently have an APM 2.6 and I'm hoping it can control the following equipment:
I've picked out the Pololu 298:1 Micro Metal
Hi guys,
Well, it's been a while since I've flown, but installing the new APM Planner 2.0.18, and then loading the newest firmware on to my 3DR hexacopter, I'm not setting any common configurations for it. I see the X8, Y6 and so on, but not for the 3
Read more…have the latest MP beta installed, its strange on the status window it will only show the GPS2 stats if directly USB connected, when I connect over 3DR radio it doesnt show them at all, just zeros....is this a known bug?
Read more…Hello,
Do you still rely on Google Earth with mission planner?
Do you have a "Plan B" as Google is not planning to support Google Earth API after December 12, 2015.
Thanks,
Marc
Read more…Hello,
I have 2 sets of telemetry radios.
Both sets are of the 433MHz version.
Is it possible to pair a radio from set A with a radio from set B ?
Read more…I wrote down a summary of what apparently happened with the android app that was deliberately sabotaged and then removed by its author after he apparently failed to get Mobius to pay him money for it and never asked his users if they wanted to contri
Read more…Dear All,
we are working on a serious project and aim to have triple redundancy in the control; one of the ways of doing this is purchasing a high end system. Our imagination is however whether it would be possible to use eg 4 pixhawks that can be swi
Read more…We are looking for an experienced RC pilot to operate and maintain our 100kg single rotor helicopter for commercial applications.
Ideally, we are seeking a candidate with the following attributes:
- Extensive RC and/or UAV experience with single rotor
I have a problem when shooting from a mission planner at the pictures of 19 scene.
But flying impressively detailed camera has 24 scene know why.
Why two threads to this mismatch why.
Thank you.
Read more…Hello All !
New to forums first time post. I am working on a Traxxas Stampede rover project. My question is in
regards to the Pixhawk PX4 2.4.6 system Specifically controlling the rover it self in real time manually
from my PC, instead of using the Tra
Hello everyone,I have been working on a heavylift quadcopter for some time now. I have used U8 Tmotors on 6s and had good success with flight time but suffered in stability. I have been looking to change to the U10 Tmotor or the KDE 7208 or 7215 moto
Read more…The documentation states that the sonar in the optical flow sensor is not accurate enough, so it needs LIDAR. I am using pulse light LIDAR. My question is can be remove the sonar in the optical flow sensor. I ask this because I plan to use another
Read more…I know this is hard to answer, maybe even wrongly asked, but the point is to try to enlist and rank among all UAV components, which is more and less likely to fail.
for example:
for a hexacopter:
1. frame structural stability
2. lipo batteries
3.ESCs
4.Aut
Read more…Attempts to fly my s900 with pixhawk have resulted in tip-overs multiple times now. This is happening after an upgrade to 3.3.1. After fixing damage from yesterday, I tried a simple test today. In stabilize, I got the copter a little light on the sk
Hello everyone,
is there anybody who has done this before? I would like to try this with my Wren 44i T-Rex 800
Is Pixhawk sensitive to ultrasound or high frequency? Any hints I would be very grateful!
Many greetings and excuse my bad english please :-)
J
Hello,
Here are key points in a few words:
I just bought the RCTimer ASP 3-Axis NEX-GH5 gimbal and the motors have three wire solder points but they are not marked as to which one is the signal. Do I wire the signal on the right or left side?
This is the gimbal: http://rctimer.com/product-980.
Read more…Hey there, I'm trying to build a small rover that will weigh less than 5kg.
I'm trying to go super cheap for this first one.
I currently have an APM 2.6 and I'm hoping it can control the following equipment:
I've picked out the Pololu 298:1 Micro Metal
Read more…The time has come for me to part with my custom built hexacopter. This has been so much fun over the last couple years, but with a young child at home I just don't have the time anymore. I have well north of $1000 into this thing but need it gone.
T
For sale:
$7500
One complete Bergen R/C Tazer 800 single-rotor helicopter WITH a DJI ACE Waypoint flight controller and a second Tazer 800 WITHOUT a flight controller. Both have JR R921 Spektrum receivers. Please see http://www.bergenrc.com/Tazer.php f
Read more…