Hello Guys,
Hello I got a pair of XBee modules all synced up and I´m ready to install the airborne one. The other one will show up as a serial port in Windows for use by the Configurator app.
Under this link, and under the title of APM MAIN BOARD, there is a bullet which states the following. "Includes ability to reboot the main processor in mid-fligh". Can someone explain that briefly please?
Is AP possible in 10cm wing span mav? im a final year engineering student. pls help me through this n giv me possible results.
Read more…Here it says that i need to add the GPS_MTK library to \arduino-00XX\libraries\\. When i opened the code there is no tab. So my questions is that do i need to add it if so can some one explain how to add and link that to code so APM works fine. https
Read more…Hi,
Does someone know if it is possible to correct for the yaw gyro drift without the GPS? So is it possible to use the accelerometers for yaw drift as well?
My airship will only fly indoors so I can not use GPS.
Thanks
Piet
Read more…I have checked every debugging item and all are correct/fixed. I am using a PC with Windows 7 and I get the following error when loading the code:
avrdude: ser_send(): write error: sorry no info avail
Any ideas?
Read more…Hi
Can anybody tell me if Canadians can by the kits from this store or do we have to buy it from the Asian store - Fah Pah. This seems to be restrictive in shipping costs.
Please advise
Dave
Hi, I'm new to the forum and new to quadflyers, so as a starting point I bought a second hand UFO5 to get used to quadflyers. It flew OK for the first couple ofweeks, although I couldn't get it to hover, but now it has developed a permanent spin. Al
Read more…Hi,
referring to the ArduCoper Wiki under the section Optional Magnetometer i an trying to compile the suggested test sketch called APM_Compass_Test.pde.
I get the following error :-
APM_Compass_test.cpp:13:37: error: AP_Math.h: No such file or director
I have a Turnigy 9X transmitter. My understanding is that this outputs PPM encoded channels. That is, there are eight separate channels, as separate signals, that are each PPM encoded.
Is there an easy way to combine the separate signals into a sin
Hello all,
My dad has had this plane, HobbyZone Super Cub, for 2 years and he hasn't opened it yet. I was wondering whether I coulf use the Super Cub for the UAV I'm going to make. Here's a link to the Super Cub: http://secure.hobbyzone.com/search/HBZ7300.html?
Read more…Been looking into using the ArduIMU+ V2 as a standalone IMU but have not been impressed by the results i have seen. The only results i have seen were both less than great. The first is here http://www.rcgroups.com/forums/showpost.php?p=16563491&postc
Read more…Hi,
I'm pretty new to building an UAV but I've just bought a Parkzone Radian and come across the question whether it could fly autonomously with an ArduPilot plus an EM406 GPS without using Thermopiles or an IMU.
I might as well add an airspeed sensor
Is there any horizon sensor breakouts that anybody created besides these out the Out the ballpark priced sensors or evenschematics for a easy low cost one to make
Read more…I cannot find anywhere that says what color motor wire connect to the ABC wires on the ESC's. Could someone point me in the right direction.
Thanks!
Read more…I was wondering what is a good camera that is able to stream live videos and is compatible with ArduPilot? I just want to fly around the sky.
Read more…Me, again - I think I am thickI have been trying to get this working - at present the following:1. Compiled and downloaded (34840 bytes) the stock standard RC1. Downloads 100%.2. Power up from USB, without any ESCs connected i.e. only the Receiver an
Read more…
