Hey, guys! I'm newbie here...I bought the main board and his daughter for make the IMU for my Quadcopter:1 x ArduIMU Sensor Board - Six Degrees of Freedom (Main)2 x ArduIMU Sensor Board - Six Degrees of Freedom (Daughter)So, I wanna make a control bo
Read more…Confused as to which voltage device I need to purchase to programme the ArduPilotIntend to run the ArduPilot from my brushless ESC which has a 5v BEC supply. Had thought I need to buy a 5v FTDI board but links on Sparkfun direct you to the 3.3v versi
Read more…When I do the field calibration, using the bind plug, the GPS Lock LED (the blue LED) blinks rapidly for half a second and then goes off and stays off. The GPS is a uBlox. In order for the GPS to lock using the field calibration, do way points have t
Read more…Hello, i wish to plan a drone wi-fi controlled through paparazzi Tiny V2 (http://paparazzi.enac.fr/wiki/Tiny_v2). I am referring to BUHOR (details in attached file) model found on spadtothebone. I am Google-ing for a month in respect to it.I have pre
Read more…I just bought everything to make a fully operating Ardupilot. When I plug the shield into the Ardupilot board, the Power LED comes on and then when I try to reset the board using the shield reset, it doesn't reset. Also when I plug my servos into the
Read more…Does anyone know which brand of props are used on the DraganFly and the new Parat AR and where I could buy just the props?
Read more…Greetings,I am new to Ardupilot, and am doing some research before I commit. I notice that the Ardupilot uses thermopile sensors for leveling, my concern is that I live in a mountainous region and I wonder how the ardupilot performs in these conditio
Read more…Hi guys,i'm an avid forum reader, i want to build a drone for my company. We deploy wireless networks. To calculate if a link is going to work right you need to do a path a check, for obstructions. this is based on satellite imagery, but some how for
Read more…I've tried to do a little reading into this and im starting to get a little confused. I've just purchased my plane and hope to get it flying this weekend and im already looking at putting a wireless camera onto it.Im using a Spektrum DX6i DSM 2 trans
Read more…HiI have a good video signal on the OSD with a direct cable connection. When I try to use the xBee radios to transmit the signal, I see only snow on my screen. I tried several Baudrates. Always snow.What setting do I need for a good signal??thanks fo
Read more…So I've been slowly working on a quad based around an arduino (yeah, I know, who isnt?). But I've recently been reconsidering whether a more advanced processor might actually save me time and money as my project grows.A processor that could handle a
Read more…Looking through the code (and the various discussions on the web) I note that the 3axis Acc uses gravity to provide stabilisation of the gyros for pitch and roll axis, but the yaw is not compensated unless there is sufficient forward motion (detected
Read more…I found this blog and links to code last night, and you guys have been really busy!I'd like to reuse the IMU code in a sample application for reading MotionPlus/Numchuck boards connected via I2C to PC's VGA port (ala 25 cent I2C adapter project), and
Read more…I remember reading that adrupilot mega will be including 2 way telemetry, But i was just wondering if this will be achieved via the same xbee modules as currently used on ardupilot. Reason for asking is I was planning to buy some XBee Pro 900 modules
Read more…Looking at the possibility of building a navigation only system as a starter for 10.Can someone direct me to a circuit diagram for the ArduPilot Shield board please.Unsure if I need the board as have no desire at this point in time to measure air spe
Read more…What diameter tube is required for ArduPilot v2.x and what effect would a larger or smaller diameter have?
Read more…I just purchased the Xbee Pro 900mHz. I am able to change the Baud rate for the uBlox GPS. But I do not know what I need to change for the Network IDs. There is something call Modem VID. Is this it?
Read more…Hello all,I opened the case of my bluetooth gps and it seems to have a little plug (see red circle on the picture below). Do you think it's a nmea output ?thanks.
