I am new to this group. I was using Ardupilot Mega 1.4 for my Quad and it was working reasonably well. I made some frame modification and programmed the board with APM Planner 1.2.67. Then the accelerometer caliberation, radio caliberation completed
can any one help regarding this problem.....actually my sd card mount has some problem in mounting sd card....is there any way to override the functions related to it.....without disturbing the rest other functions..........?
I'm Rafa, and I'm studying science at my high school. We have a great project to do: build an ArduCopter UAV. We've alredy bought some pieces, we've built the body, but, unfortunately, we're not sure if we can use our ArduPilot Legacy with ou
I have the turnigy 9x. I followed the Instructions for the 6 position output. I ran the Arduino uno to monitor the output, working as described in the instructions. When connected to the ardupilot it is not changing modes, it is also not showing in
I am trying to tune the ArduPilot for Bevrc X-5 plane. At the moment I am playing with roll P gain and trying to achieve acceptable stability in FBW mode. Also, I am trying to overcome the plane peculiarities: he has tendency to roll in positive dire
I've recently received the legacy Ardupilot and am trying to put everything together. I actually bought all the sensors separately (did not purchase the sensor shield from the DIYd store), and have been looking through the code to try to hoo
I've been trying to get my board (the old, red, sparkfun one) to listen to my receiver but CH 4 doesn't move. Testing it with a multimeter, I found that the 4 IN pin is being shorted to the VCC. I'm assuming this is the reason reading the recei
Hi. anybody having flight gear model of a UAV or any other plane model like easy star etc. i have made visual model of aerosonde UAV but unable to make its flight dynamic model. Anyone can help me in any of the above area please.