Iris+ Transmitter remote output measurement
Anyone know what the measurements are on the screen display for the IRIS+ transmitter remote?
I am referring to the ALT (altitude).
Read more…
2 Replies
All Discussions (556)
Sort by
What does a steady tone from the TH9x transmitter mean?
All of a sudden, my TH9X transmitter (stock Iris+) starting sounding a constant high-pitched tone when the Iris+ is plugged in. I actually think the alarm (?) is coming from the frSky DJT module on the transmitter.
I've tried new batteries in the tran
Read more…How does point of interest work?
Does this keep the camera aimed at the subject by keeping the aircraft aimed the right way or must it use a gimbal?
Read more…Iris+ Upgrade For The Win
I'm a very conservative flyer, but after about 10 months with the Iris, building flying skills with a good micro, and making the Iris+ upgrades, I needed to push the limits a bit. The Iris+ was absolutely rock solid.This was a reality capture Auto mi
RTL on FailSafe Question...
I tested the TX failsafe by setting it to RTL and then once I started a mission I shut off the TX. Everything went as expected and it immediately aborted the mission and RTL. I then started a mission and unplugged the 3DR radio from DroidPlanner expe
Read more…IRIS+ for mapping - custom mount and camera case design
I wanted to share what I have been working for the past month to properly mount a camera to the IRIS+ (or original IRIS). I never liked the idea of flying a camera like the Canon S100 (or any camera) without some protection and vibration isolation. A
Read more…Strange gimbal tilt behavior.
I recently did some flying without my tarot installed. I have re installed the gimbal but now the tilt is acting up. The tilt works as expected in ALT_HOLD and POS_HOLD, but when I switch into AUTO the gimbal tilts back up to looking straight ahead
Read more…IRIS+ parameters for Tarot Gimbal
For the original IRIS, we had to load parameters for the Tarot Gimbal. I don't see an "IRIS+ with Tarot" option. Or do the IRIS+ parameters come ready for the Tarot?
Read more…Configuring MinimOSD for Pixhawk
Hello,
I'm trying to configure MinimOSD for Pixhawk and run into a problem. I installed minimosd-extra 2.2 firmware on it, performed configuration. When I connect it to Pixhawk telem2 port I see only text like MinimOSD Extra version and telemetry does
Read more…Please recommend a cable for 3drobotics 2.4 GHz amplifier
Hello,
I've purchased http://store.3drobotics.com/products/2-4ghz-amplifier-1000mw and I would like to order a longer antenna cable.
Do I need RP-SMA female to RP-SMA female cable? Or should it be SMA?
Thank you,
Roman
Read more…IRIS+ for Commercial Use...
I keep reading everywhere that using drones for commercial use is illegal without the FAA exemptions. But I cannot seem to find an answer to my single question;
Why are there so many websites of companies offering photography and aerial services using
Read more…Iris+ first flight, flat spin. Calibration?
Hi,
My first flight with my brand new Iris+ went well - no crash, but it kept rotating anti-clockwise and the more i put the left stick to the left the less spin. All the way to the left it was slightly spinning clockwise. I found the mini trim and tr
Read more…Suburban powerline EMF interference
Does anyone have experience with flying IRIS near suburban electrical power lines and transformers?
There are many online videos of UAVs flying in suburban settings with visible utility poles and lines.
Since EMF attenuates rapidly with the square of
Read more…Tarot Repair do-able?
First crash banged up the Tarot Gimbal. I'm hoping I can get the parts and repair it. Thoughts?
Iris+ Need directions how to change from stock radio to Aurora 9
I use a Aurora 9 for flying. Is it worth changing the stock Iris+ radio to my Aurora 9 ?. If so, can someone tell me how to do it ?.
Thanks
Read more…First Crash - looking for input
Well, I think it may be a right of passage. I was flying a very simple mission from Droid Planner today when everything went amuck.
- Sent DroidPlannner mission plan to Iris+ (via Nexus7).
- Lifted in AUTO, Way-point should have sent it southeast. It heade
voltage in readout wrong
When i put a freshly charged battery in my iris + it reads 11.9 volts in droidplanner and on my minimosd. Now i know voltage sag happens but this isnt even armed. Any ideas? In mission planner i have the 3dr 4 in 1 esc power module selected with 5200
Read more…IRIS old parts for new UAV
Once I do the IRIS+ upgrade I would like to use the old IRIS parts to build a new UAV. Has anyone here done something similar? I was thinking about buying IRIS internal plates, doing a mast for the GPS, and avoiding the top and bottom shells if possi
Read more…3DR Iris for MAPPING - Assembly & Mount for Canon S100
FINAL MAPPING ASSEMBLY :: FEB 13, 2015
As promised, here are the images and captions for the community
to benefit from for the custom mount design to fit the Canon S100 to the Iris.
Looking back at this process I see way simpler approaches to mounting
Tower Software cannot hold Iris+ in the air
So I recently planned some missions with the Tower software. As instructed to do upon it coming out. I first used my Iris+ with no gimbal and it performed flawlessly. I then attached the gimbal and when it tried to do any sort of turns it fell out of
Read more…