During the AC3.2 testing an issue has come up especially with a few IRIS copters where it's gotten a bad gyro calibration.
The likely cause is that right after the pilot plugs in the battery they shut the battery door. This is totally natural but the
Read more…Sad day. After good trials with original battery, very easy loiter mode, stable, gentle landing... real pleasure.
Today I changed to spare battery (Turnigy Multistar 5200 mAh 3S 11.1V). Switch on, proper blanking green, but as soon as I give some thro
Read more…This happens a lot with my IRIS, especially on windy days!
Just upgraded today to the latest beta FW, calibrated compass and acc, result the same.
Remote mid point etc are also good.
I looked at the logs myself, saw the EKF errors, not sure related but
Read more…I followed the instructions for connecting the tarot gimbal/go pro with this video: https://www.youtube.com/watch?v=aHkfuRddrOY&feature=youtu.be
In the video the within Mission Planner v1.x there is a box with titled default setting where iris with ta
Read more…Hey everyone this is a short intro on a project
I've been working on for the past month or so.
Canon S100 - 3D Printed Mount
Based on a craigslist ad, I found a reliable,
honest, and skilled individual with experience in
auto cad and a 3D printer.
Ryan
I had a crash last month and I attached my tlogs. Could someone help me figure out what went wrong? Attached is a tlog:
I had a downward facing mobius taking time lapse photos of a sewage stream running into Lake Titicaca of Peru.
I usually never ha
Read more…3DR for some strange reason, was no help with getting these settings. They referred to an inactive website. How hard can it be for them to give me the original IRIS settings? Seems a little strange. I would appreciate some help if anyone has the orig
Read more…Greetings,
I'm very new at flying with Iris, but after I land and move the control stick to the disarm position, I need to disconnect and reconnect the battery to fly again.
Is this common/expected?
Often I'll fly for 3-4 minutes, then need to check s
Read more…I have flown the IRIS since June. I checked many posts to find discussions with solutions, but haven't been successful yet.
My problem: the data link between the IRIS and my ground stations is lost too easily. Either using a tablet or a laptop, when t
Read more…IRIS noob.
I would like to know how to change the Stabilize Mode settings for more nimble and responsive flight. I'm not planning flips or rolls, just need a little more challenging experience with Stab mode.
Thx.
Read more…Noob IRIS flyer here,
When the stock failsafe voltage is reached and I recharge, I'm putting way more than 70% back into the battery. Does anyone have a link on how to change the battery failsafe to 3.7V?
Thanks...
Ross
Read more…Finally!
More than a month since I flew my Iris into my house on it's maiden voyage (thanks to my forgetting that altitude hold really tries to hold altitude, and therefore dropping power to idle for a couple of seconds doesn't do anything), I final
I took the UAV (3DR IRIS) for a flight yesterday, noticed several malfunctions on the gimbal. Here there is an edited video:
https://www.youtube.com/watch?v=vR2GGBVCcMQ
Notice the shaking and vibration starting and stopping at random times. Also when p
Read more…Hi everyone,
This might be a dumb question. According to the IRIS operation manual and from what I've read in most discussions, the WiFi capabilities on the GoPro have to be turned off. I'm wondering if this true for both manual and automatic flights?
Read more…Hi all,
I was wondering what kind of I/O specs there are for the IRIS. Say, if I attached some sort of sensor on there I would need an analog input into the IRIS to store the data. Does anyone know where I can find more information on this?
Thanks,
Kate
Read more…Very new to copter flying. How on earth do I keep the batteries at half charge? I have a 3dr iris that came with a lipo charger.
Read more…Some Printed Parts and some Stock Purchased Retract Servos (HK).
20140528_085934%20%28Medium%29.jpg
20140528_085954%20%28Medium%29.jpg
20140528_090002%20%28Medium%29.jpg
H
|
I have just started using APM Planner 2.0 with my Macbook Pro i7, 10.9.2. First couple of test missions have gone well.
Just a few things I would like to understand further about my auto flights. One of my waypoint settings I have set Iris to do 2 tur
Can someone please explain what the main home screen on my Iris transmitter tell me?
Apart from the two squares with the dots in the middle, I am not sure what the rest of it tell me.
What are the bars between the two squares for? I've seen on 3DR vide
Read more…I don’t think that Iris does has a barometer or other altitude-sensing device, apart from the GPS unit. I know that GPS can approximate altitude, but not very accurately. So how is Iris able to land so nicely in Land or RTL flight modes?
Read more…