I need to be able to hike and ski with the Iris+I was thinking of trying to figure out a way to lash the Iris onto the outside of a backpack. I'm a bit concerned about how to do that in a safe and secure way. My plan for the gimbal was just to carve
Read more…Excuse me if this has been asked and answered, but a quick search of these forums did not return anything specific to the Iris+, Tarot, and GoPro Hero 4 Black.On another quad of mine, I re-balanced a zenmuse H3-3D gimbal to account for the Hero 4's e
Read more…Can anyone point me to an idiots guide to amps/milliamperes and voltage?Coming from the software side of things I've never really payed much attention to things like amps or volts. As I transition away from the DJI Vision+ (which simply gives me a ba
Read more…In my efforts to automate offline maps to my tablet, I have come with something that works for me.
Requirements for this process are:
Would this work on the stock FlySky FS-TH9x RC shipped with the Iris+?
http://www.amazon.com/gp/product/B00M9CD1O4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Read more…Last call!
2014 is coming to an end and so is the chance to upgrade your IRIS to the IRIS+ with our IRIS+ Upgrade Kit. They are only on sale until 12/31/2014, we WILL NOT be selling them after this month. They show out of stock now, but we'll have mor
Read more…When I use a servo cable to extend the video cable coming out of the gopro into the OSD, I can either get the OSD display with no video, or video with no OSD.
When I plug the gopro video cable directly into the OSD and transmit, i get video and OSD.
Ca
Read more…After seeing a comment recently about Droid Planner 2 not supporting multiple waypoint edits, I thought I would re state the feature.
Open up Droid Planner 2 and create a test set of multiple waypoints,
make sure you are on edit mode and click and hol
Read more…Hello,
Today I was going to fly my IRIS quadrocopter. But flight was not successful due to power issue.
For this flight I was using fully charged batteries which were working fine 2 weeks ago. Before launch battery readings were at 12.3 volts. Once I t
Read more…I am curious to know if there is any benefit to using 5.8 Circular Polarized Antenna moreover the transmitter antenna and receiver antenna that come factory on the Iris+.
Thanks,
signature here
Read more…I know this comes off as arrogant, but im pretty much the best pilot here. The only thing here, that comes remotely close to being a better pilot than me, is the text in this post?
Anyway, proof is in the video.
Read it and w
Read more…Recently I was searching the internet for how to change the bands on a Black Pearl video receiver, and I found plenty of post asking for an answer, and users who answered their own question, without posting the actual answer. And also a lot of people
Read more…Hello all,
Wanted to let you know that this winter I be using my IRIS+ to film at various locations around Colorado to capture some of the amazing landscape as it is blanketed in snow and ice.
Here is the trailer Into The Cold...Trailer
Looking forward
Read more…What is the level of effort or possibility of having OSD on the Iris+.
I have seen a video of the original Iris that had an open telemetry port that was used for the overlay.
Looking at the PixHawk on the Iris+ both telemetry ports are already taken.
Read more…Hi everyone,
I am a newbie with the IRIS+ and tarot gimbal. The gimbal was working fine the first day but now its not working at all. It is properly connected and it has power, the LED´s on the TAROT board are blinking in blue and there is another yel
Read more…Somehow I have managed to set the battery monitor to the wrong setting.
In mission planner what sensor do i select for Iris+?
Thanks
Read more…Hello All,
Complete Newb here trying to come up to speed. I'm 8 flights in on the IRIS+ and 4 of those flight are with the Tarot Gimble. I'm thrilled with the results and floored by the code and technology that's come from the open source communit
Hello,
I gave my IRIS a test today and noticed an annoying gimbal vibrations which reduce video quality. This happens even when motors are off. During flight vibrations go off for some time but then suddenly reappear.
Here is how it looks like: https:/
Read more…IRIS+ is up. As someone who has been operating rc's and multirotors for several years now I will without hesitation say that this is a truly an amazing machine. I am really looking forward to using it for my filmmaking and photography.
Hello,
I'm unable to download logs from IRIS. When I connect to it in MissionPlanner terminal it keeps outputting strange characters every second. First it prints standard
Ready to FLY ublox OK
then it prints strange characters like
QMQH3Qv... and so o
