Does anyone have an N number for their IRIS yet? I've come across an issue that's stumping me.
To fly commercially, one needs a 333, a COA, and a registered aircraft with an N number (among other things). You cannot currently apply for a COA without a
Having an issue where my Iris will return to launch about halfway into a Tower app mission. Once the Iris is launched and switched to AUTO, the thing takes off and lets me know that it's approaching the 2nd waypoint. Then I get a battery level notice
I'm sorry to put up one question by another. After I update my firm ware because of the control show all 0 value. Then the problem start. When i start to dis arm is show PreArm: Need 3D Fix.I don't know what is that and where to look for. I h
My Iris+ show no voltage at the control. All lights are up and other figures had shown.The battery is full charged but the screen show 00 vlt. I change other 2 batteries show same. What I have to look for. Also frequently have to re calibrate the rad
My previous discussion was channel 1 no signal. My remote show not data.So I try to open the top cover of Iris+ to see anything that came loose. After I open the cover I saw one harness from the receiver was not plug in. I don't know is accidentally
My Iris+ won't start and I look at the control the dot is way off from right bottom for disarm. So I try to calibrate and it show the error message of "Channel 1 no signal. I've 0 experience for the system. Just know to fly only. But I can take apar
A few days ago I happened to update the iris using the PC software Windows MISSION PLANNER since that time can not display the consumption MAH battery or battery voltage in the rc (by pressing the DOWN key on the RC).
I have a couple of issues that involve droid planner that I can't figure out.
1) before launching I clear the old way points. All I want to do is use the telemetry to keep track of the Iris in flight. Upon launch, as soon as it gets to about 10' the p
I lost my 3dr ground station from iris+. So, should i buy new 3dr ground station along and connect it to air station? or i need to buy both air and ground stations and change it in the iris+ guts?
Need a good answer because i'm a new in such questions
I took the guts out of a old Iris+ and put most of the parts on a 470mm frame. I have a Q-Brain 4 in 1 25A ESC going to cheerwing 920KV motors. During standard calibration the motors twitch and one of the motors smoked a tiny bit. This is with a 5200
Hello again,Can't seem to find what is the lowest battery voltage you can safely go down to before replacing the AA batteries in the controller. Could only find the lowest voltage for the lipo batteries in the Iris.Thanks.Loran
Hello, new to flying. Bought an Iris almost 2 years ago and never had a chance to fly it. Also bought the Iris plus upgrade kit when it was available. One of the first things I wanted to do when I retired was to fly this bad boy. So the other day I d
Hi I have got a ilook+ camera for my iris+ and can you tell me how I can take photos useing my transmitter radio can it be done I posted this the other day but no replies at all