Gender
Male
About
Location
Zanesville, Ohio
About Me:
Just intrested in amature UAV's, RC Heli's, Airplanes....
Please tell us a bit about your UAV interest
I just like the challange
Activity Feed
"Here is the beta verison for the Xbee Pro 900 DP v.1052 if anyone wants to try it out.....
I been useing it for about 2 months without any problems.
JasonXBP09-DP_1051.zip"
I been useing it for about 2 months without any problems.
JasonXBP09-DP_1051.zip"
I am using the APM and the GCS. When I start everything starts up and works, but my Alt is about 235 meters at my home location and the white needle pegs out over the 200 meter mark. Is there anyway to change this or zero out the needle back to 0…
"I had the same problem, but only with HobbyPartz.com. Tried to cancel my order 1 hr after being placed, they emailed me 24 hrs later (2 hrs after it shipped) and told me its already shipped and I should have called to cancel it.
Never had to cancel…"
Never had to cancel…"
"It looks like the 98" Reaper's are back in stock at Nitro Plane's if anyone wants to order one."
"So I re-programed the Ublox and checked the settings. Now I am getting data....
Init ArduPilotMega 1.0.1 Alpha
min / max from eeprom 1000 2000
Offsets -7.08 138.42 -16.02 2.98 23.57 -56.42
##FBW A
XXX Startup: AIR
load WP
PWP: 0, 0, 0
CUR: 0, 0,…"
Init ArduPilotMega 1.0.1 Alpha
min / max from eeprom 1000 2000
Offsets -7.08 138.42 -16.02 2.98 23.57 -56.42
##FBW A
XXX Startup: AIR
load WP
PWP: 0, 0, 0
CUR: 0, 0,…"
"I'm getin the same error with the UBlox and MTK GPS
Jason"
Jason"
"Do you have a AVR driver loaded on the computer ? I had a conflict with the AVR studio and the FTDI drivers.
Try to uninstall the drivers for the AVR.
Just a thought.....
Jason"
Try to uninstall the drivers for the AVR.
Just a thought.....
Jason"
"Yes, I am having the same problem. I call DIgi (also I have the new firmware for the Xbee Pro 900 DP ver. 1051 Beta if anyone needs it, PM me)
I have to flash the firmware on the Xbee everytime I run the Ardupilot 2.6.2 and use the Xbee.
That…"
I have to flash the firmware on the Xbee everytime I run the Ardupilot 2.6.2 and use the Xbee.
That…"
"You will need a Ublox and Ublox adaptor and Ublox ext cable.
For airspeed sensor, you will need the breakout board and sensor.
(thats if the code used supports it)
Eveything is slowly coming together, it takes time, there might be a slight change…"
For airspeed sensor, you will need the breakout board and sensor.
(thats if the code used supports it)
Eveything is slowly coming together, it takes time, there might be a slight change…"
"Jordi, I would be interested in beta testing and helping out.
Jason"
Jason"
I can't get a GPS lock with the ArduPilot pluged in. The data coming out of the port in RealTerm is...Ardupilot!!! V23# of WP: 50 Lat: 39967928 Lon: -82008712 Alt: 3051 Lat: 39968124 Lon: -82013112 Alt: 642 Lat: 39970936 Lon: -82012984 Alt: 673 Lat:…
"You shouldn't have any problems. Digital's have a high frame rate and have more power and use more power. Better centering and higher holding power. They would be idea for larger UAV's but will work find."
"Well the simple way I thought about it was under the "Categorie" Just post a Buy Sell Trade, then people can post a message for what that have for sale, trade or looking for. Someone wanting to buy the item can post a message that they will take it…"
I was wondering if the idea has ever been brought up about starting a Buy Sell Trade Forum on here.I have some extra borads from PC Batch and maybe a few other items, IC's LEDS, ect that I wouldn't mind trading ot selling so other people don't have…
"Because of the high cost of the thermopile's, has anyone looked in to where we could get them from. By the looks of them, they might be used in automobile's for the heating and cooling.
Just thought maybe a cheaper way of getting them would be…"
Just thought maybe a cheaper way of getting them would be…"
