"You can't send video through the telemetry, you need a video transmitter on the plane and a receiver that plugs into an RCA to USB-capture card, then you will have FPV-view in Mission planner."
"Finally some pictures. I used the standard 4 bolts in the front to attach a aluminium plate where I mounted the gimbal. I did a small cut-out to let the cables through.
"Does this tutorial apply for the Gent-WireUSB cable also or do I have to make a cable like the one in the tutorial? I ask because other tutorials I've seen say that you should use RC_OUT_CH_7 as trigger control."
Hello!I've connected the trigger cable to servo output 7 on the APM 2.0 and manage to make it react when I activate servo 7 in the MP's flight data screen. I can only see a tiny twitch and wonder if that is enough to make the camera trigger by…
"I'm having the same issue,
" 'error opening com port'. While the icon in the upper right shows it as not connected"
I just updated to 2.5 and it worked before that.I just tried another approach:
Unplug USB
Start Missionplanner
Navigate to…"
I've filled the Camera dialogbox with information and it shows the following info:What are the key values I need when calculating the overlap?How do calculate what speed I need to fly to match the flightline distance to get 70% overlap? I use CHDK…
After I upgraded the missionplanner I can't see any advanced params. I've got .Net 4.5 installed and it has worked before with version 1.1.94 for example.
"Hello Marco! Nice platform you've got there!
I fly both APM2 and MK and I wonder how to connect and configure the 3DR Radio to my Oktokopter, do you have any schematics on that?
/Per, Sweden"