Gender
Male
About
About Me:
Software engineer for train and power plant simulation company
Please tell us a bit about your UAV interest
Started with a x-Ufo, then want to have something more open source
Activity Feed
"OK, so hot glue will also work pretty well. Just need to make a frame to hold all rod in place."
"Hi,
I am currently bulding one of those and I was wondering where I could find the plastic connectors which connect the rod of the outter cage? because I cannot figure how to build those, I assume there are probably something already existing…"
I am currently bulding one of those and I was wondering where I could find the plastic connectors which connect the rod of the outter cage? because I cannot figure how to build those, I assume there are probably something already existing…"
"Hello Polak74, really nice job.
I have a custom servo drived gimbal on my discover, and it weight only 70g including servos.
I was also looking for a cheaper brushless gimbal and your work inspired me, so I ordered also a "cheap" brushless…"
I have a custom servo drived gimbal on my discover, and it weight only 70g including servos.
I was also looking for a cheaper brushless gimbal and your work inspired me, so I ordered also a "cheap" brushless…"
"totally aggree with Michael.
I also bought a ARF Bixler2, I would really have prefered it was not already stuck.
But it is a great plane anyway"
I also bought a ARF Bixler2, I would really have prefered it was not already stuck.
But it is a great plane anyway"
"Thanck you Josh, that was what I was afraid of. The Gopro2 already had this issue but few peoples are aware. It and when I mentionned it most users and seller in shops told me it was the Video transmitter or I was wrong...
Do you know if the Gopro 3…"
Do you know if the Gopro 3…"
"Hi, I experienced the GOPRO 2 for FPV, connected to a 5.8Ghz videotransmitter.But the Gopro live feed induce a 1/4secondes delay.
Do you test the Compoisite video feed on the GOPRO3 to check if the Delay was still here?"
Do you test the Compoisite video feed on the GOPRO3 to check if the Delay was still here?"
"It's OK, I thaught of that and double check the prop orientation.
Anywa I ordered a New motor, prop and prop adapter, so I will make the modification one step ata time and be able to idenfy the weakest item..."
Anywa I ordered a New motor, prop and prop adapter, so I will make the modification one step ata time and be able to idenfy the weakest item..."
"Yes the prop adapter is not drilled straight !! But I don't think this cause the lack of thrust.
You are wright, I just tried to set the motor mount upsidedown and the prop touch the fuselage. So I think I will have ti play with the CG to improve…"
You are wright, I just tried to set the motor mount upsidedown and the prop touch the fuselage. So I think I will have ti play with the CG to improve…"
"The flight caracteristic are not that good, it goes up when I add some throttle ... :("
"Comment by Sylvain just nowDelete Comment
Hi,
I removed the motor mount to change the motor because I am one of the unlucky guy who gets a power less motor. Then I noticed the motor mount was not symetrical, mine was installed in such way the motor…"
Hi,
I removed the motor mount to change the motor because I am one of the unlucky guy who gets a power less motor. Then I noticed the motor mount was not symetrical, mine was installed in such way the motor…"
"OK,
But what do you put in the nose??"
But what do you put in the nose??"
"Hi.
Nice Setup james!
I have 2 questions:
1./ About the fuselage. It is obviously made of 2 half parts. Do they come already glued? is it easy to split it in two??
Would be much easier to work with the 2 parts instead of the whole fuselage.
2./ In…"
Nice Setup james!
I have 2 questions:
1./ About the fuselage. It is obviously made of 2 half parts. Do they come already glued? is it easy to split it in two??
Would be much easier to work with the 2 parts instead of the whole fuselage.
2./ In…"
"I modified the Camera foam attachement, now I can pu the gopro or an old 6grams CCD camera when recording is not necessary. The foam include now the 5.8Ghz Video transmitter, and the receiver antennas are vertical to improve range. On of the antenna…"
"Hi
I had a similar issue with a Multiplex controler:
When powered it just beep and was not powering the motor. It was following a disconnection of the battery while in setup mode, setup was not complete.
To "Reset" it I had to power the ESC with a…"
I had a similar issue with a Multiplex controler:
When powered it just beep and was not powering the motor. It was following a disconnection of the battery while in setup mode, setup was not complete.
To "Reset" it I had to power the ESC with a…"
