Gender
Male
About
Location
Glendale, AZ
About Me:
I own a small manufacturing shop in arizona. and have built uavs for the surgeon general(airframes only).. I have a full cnc shop and have been in aviation from flying real planes and building several from kit,i have a priv pilot lic,and fly rc copters and planes for 20 plus yrs. i have been playing with basic stamps and now adu so this is a natural step
Please tell us a bit about your UAV interest
I own a small manufacturing shop in arizona. and have built uavs for the surgeon general(airframes only)..I can not talk about there missions or capablitys due to a non-discloser act.But if one was to goggle (nmt) with the other appropriate words I'm sure you can find some info,lol..I have a full cnc shop and have been in aviation from flying real planes and building several from kit,i have a priv pilot lic,and fly rc copters and planes for 20 plus yrs. i have been playing with basic stamps pixaxe,avr,adu,even propeller,lol and now adu so this is a natural step
Hometown:
az
Activity Feed
"wow nice to bad the nex5 does not work, i'm not about to put my a6000 in the air."
"Thats really cool, ill have to give it a try. "
"Hi Dale, Increase your voltage to lower amperage, but you must lower the KV of your motors to match. This brings the total amps within the range of the batteries. I few a Quanum 680 pro (same as the tarot) with the Multistar Elite 3508 268KV motors…"
"Hello, This is Chris with HobbyKing. I would like to take with you about adding more of our line up to the configurator. I've sent you a friend request. Thanks and BR."
"The Nova Version of the cheerson cx-20 has a lot of improvements, that Cheerson has now adopted some for there own CX-20.
1) The compass is in the tower and does not suffer from the toilet bowl the early cx-20 did with onboard compass.
2) The KV is…"
1) The compass is in the tower and does not suffer from the toilet bowl the early cx-20 did with onboard compass.
2) The KV is…"
HobbyKing has a MINI APMhttp://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=51498
Now they "hobbyking" have Telemetry radio cases. They look pretty nice i may pop and a set.http://www.hobbyking.com/hobbyking/store/__45363__Telemetry_Radio_C...
"They had a plastic one too, this is tabbed together carbon plate that is cnc cut. if you look close you can see the weave. I have there go pro mount they just released that is made out of the same. they didn't say it shields or anything just…"
A carbon case box was added to hobbyking last night for the apm 2.5. Carbon-fiber is conductive and does deflect/obsorbe 2.4ghz so i wonder if this would provide any mag shielding…
"So this is in a plane not a copter ?"
"Do not use the 3dr it is Optimized for aircraft not multi-rotors to help loiter use the file I attached.."
"This file is a NEO-6 version of 3DR-Ublox.txtIt was configured from scratch on a stock u-blox NEO-6M GPS, so shouldn't cause the errors seen using the 3DR LEA-6 version.Like the original, it enables only the features needed by ArduPilot (Mega) /…"
"This is the correct file for the neo6 sets proper baud refresh and to 10hz update etc etc
CN-06v2.0_(NEO-6M_u-blox_6)_APM+MPNG_config.txtCN-06v2.0_(NEO-6M_u-blox_6)_APM+MPNG_config.txt"
CN-06v2.0_(NEO-6M_u-blox_6)_APM+MPNG_config.txtCN-06v2.0_(NEO-6M_u-blox_6)_APM+MPNG_config.txt"
"my vote"
So I have two identical a PMs on identical quads one has 2.9 and the other has 2.9.1 The one that has to .9 .1 seems to jump all over the place in altitude hold in viewing the logs Noticed the accelerometer Raw data was swinging almost 400 versus 10…
"same no discount"
