Hello,
I have seen quite a few threads about APM telemetry through MAVLink to a FrSky receiver.
There are different solutions with different needed hardware.
I have an APM 2.7 in my quad. I am using also a FrSky D8R-XP receiver (PPM) and a Taranis trans
Read more…Hello,
I've been trying to set up a control system test bench. Basically, I use to study the impact of data filtering algorithms on the control of fixed-wing drones. It occurred to me that I could utilize the SITL and HITL features of the ArduPilot pr
Read more…Hello
can anyone guide me how to control pixracer (with PX4) from pc via wifi.
I was looking for mavlink guide but I couldn't understand how to use it.
For start I just want to control throttle, pitch, roll and yaw rate with mavlink (with C programming)
Read more…Hi, currently building a large drone with 12 rotors, I’ve been told pixhawk 2.1 will be best suited to my heavy lift drone.Will I be best splitting the outputs to adjacent escsOr Can I use the auxiliary outputs for the other 4 motors?Thanks
Read more…Hi, I'd been looking at flying a UAV from the Dover to Calais or vice versa and got so far as selecting a Skywalker and researching specs for it, but a previous thread I read suggested this would be a no-no legally without "eyes on" the drone trhough
Read more…DIY folks, I have a VulcanUAV X8 frame on the way and haven't done a custom build in a while. Does anyone have some recommended PIDs for me to get started with? Would you suggest using Autotune on such a large airframe?
Read more…Hi Everyone; I posted this message on "Discuss Ardupilot" as well; posting here too to see if I can get more feedback.
https://discuss.ardupilot.org/t/please-help-imu-and-motor-balance-mismatch-warn/21208
For a couple of months now, I've been almost al
Read more…Hi guys, you are my last resort to fix this problem. My APM will not throttle UP when failsafe is breached or operate when I manually turn to circle or RTL using my Turnigy Tx. I realize plane is not going to respond when FS is breached but the thr
Read more…I can't upload waypoints anymore. This function used to work until very recently.
I'm using Mission Planner 1.3.49, and I also tried 1.3.48. Same problem.
Setup:
Win10/64
APM 2.6
Now EVERY time I try to upload any mission I get the following error:
-----
Read more…As many of you might already be aware of, next year a new EU regulatory framework for UAVs should be coming into place.
https://www.linkedin.com/pulse/new-easa-regulations-eu-ce-marking-directive-everyone-vertechy
http://www.sitaonair.aero/skyguide-pro
Read more…Trying to install Vers. 2.12 I receive an error:
Faild to run a post-install Service. Unknown error while running C:\program Files\UgCsBeta\java\java.exe-jar../../tools/unicode-escape/unicode-escape.jar -encoding utf-8../../server/ucs.properties ../..
I have a Pixhawk, Taranis, the data modem attachment for Pixhawk as well as the GPS Ublox antenna, X8R receiver, and a ton of "bonus" items ranging from spare receiver antennas to wire shrink wrap.All are like-new with original packaging. Installed i
Read more…I have a Drone running MultiWii v2.4 software. I am running a Bluetooth MultiWii controller App on my Android phone. The controller is using MSP commands to control the MultiWii drone. I am using the drone in an educational project for coding educati
Read more…Hi
i have just ended my first flight with a ar wing 900 (delta wing) and with a pixracer installed on.
the wing flyes well in stabilize and fbwa , rtl run perfectly, during setup i had problems with internal mags
(disabled) but the external (3dr) is
Read more…sounds like a simple enough question...and some of the implications have not reared their head yet in flights to date...but a general question.... hopefully a consensus of technique....
How tight do people tighten their folding prop bolts? IE: do you
Read more…I had a Pixhawk connected via the official power module, itself supplied by 12V from an SBEC itself connected to a 36V battery supply.
I say had, because the SBEC failed in a cloud of smoke and now neither the Pixhawk, nor any of its ancillaries work
Read more…Tattu has been an active member of the miniquad community since the early days, but this is their first foray into the motor world. Tattu 2305 2450KV Brushless Motors are made for FPV Racing drone. Each Quadcopter motor has been carefully balanced a
Read more…Hi can some one please tell me if it is going to be implemented that we can use CRSF protocol with the pixhawk please,many thank's,Marty
Read more…We are seeking an Electronic engineer / undergraduate, to develop an autopilot carrier board for a drone, and a set of sensor interfaces.
The suitable candidate will need to have the following:
Good knowledge of Altium
Have his own copy of Altium
Read more…