Hey Guys,
Hi there,
I studied the Ardupilot manual online but have some questions regarding the initial field setup.
I am using Ardupilot with Ardushield V2 and XY thermopile sensors from Copilot 1. I am also running Ardupilot code version 2.6 on the above confi
Hello Everybody,I wanted to know the kind of vehicle required for flying at a takeoff height of 2000mtr and flying upto 5000mtr.Will the DG1000 fibreglass electric glider satisfy this requirement.Or a bigger banana hobby model with a wingspan of 101
Read more…Hi guys,
I recently bought this GPS receiver containing a SIRFIII chipset. I want to use this great deal (yes, its really just 17 Euros) with the arduIMU board and thus had to adjust the already included EM406 code a little (slight different initialis
Hi, I currently am making a UAV. I will the the electronics by the end of the week. I AM A TOTAL noob at this. Is there anyone that is willing to help me?
Hello All,
Hey guys,we tried uploading the ardupilot program to the ardupilot board and encountered the following error.avrdude: stk500_getsync(): not in sync: resp=0x00avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51.Can somebody help us up on
Read more…Channel one of my Rx has a y splitter servo cable which goes out to the ailerons and to the rudder. But when I turn the stick to a direction....the ailerons move to turn the plane the way I want it to go...but the rudder does the opposite. I can't re
Read more…Hello all, I'm planning to buy one Skywalker EPO for FPV.
Wondering what are the max/normal/min cruising speed of Skywalker EPO??
Thanks!
Hi, everyone. I purchased a full set of ArduPilot from DIY Drones store. Now I encountered a problem in testing XY sensor
http://store.diydrones.com/ProductDetails.asp?ProductCode=SE-0002-01.
Today after I load the test programme into the ArduPilot boa
Read more…I just realized I needed the uBlox adapter board for my GPS so I had to pay S&H twice in one day. Not mad at anyone but myself on this one but I want to make sure I have everything I need now:
I have
-4 digital servos
-uBlox GPS module
-uBlox adapter bo
Read more…Can anyone recommend a good model or a source for a 7-10" color LCD monitor for ground station viewing?
Thanks in advance!
Read more…I am looking for a bird like RC plane. This vehicle needs to be like a small hawk or smaller bird like a pigeon and must look very realistic. Prototypes which cannot fly very well, but can glide comfortably will do. Thankyou.
Hi all,
Just wondering if there is such a thing out there to convert PWM signals into RS232 commands?
Ryan
Text Missing Line Terminator #if GPS_PROTOCOL != 3
In my copy of 2.6 I have added the line in bold below.
It is minor but makes it easier to read the telemetry in custom ground stations and also appears to be consistent with the other GCS serial pack
Read more…Hi Guys,
Have a bit of a problem which i dont think fits in either 2.6 or IMU.....(please correct if wrong)
Ok...we have the IMU V2 coded with v1.7, set for NMEA (using a locsys gps), setup to speak this new fangled emu language:).....
Sorted t
Read more…Can someone point me in the right direction in creating an autonomous quad helicopter?
i need to know all !
for example what do you recommend i use as far as:
board (PC or Arduino for example)
GPS
Motors
Blades
etc etc
I'm trying to get GPS lock with my new U blox GPS. I'm using the default 1.7 software.
Labview works fine, but I don't get a blue light to indicate GPS lock, and of course no data.
I ordered the GPS from DIY and asked for it to be programmed for ardupi
ok having small issue . with my build i need a bit more verticle lift for an acrobatic like move . im working with placing two motors/prop. kind of deal.can anybody suggest a motor prop combo 8 to 9in. will work and electric and the plane
Read more…Ok this is my ArduMega Setup. I am using the ArduPilot Shield V2, A locosys 4hz GPS, SCP1000 Pressure Sensor (not connected to I2C yet) and the IMU ADXL330/LISY3000 Breakout board.
Here is the picture... Stop laughing geez...
I have the 2.6 version
Read more…