Hi all,
how to control the large scale uav team to fly following the certain trajectory generation?
particularly, the enviroment have moving obstacle with the respective characteristic:
1 .the number of obstacle is changed dynamically, each have the spe
Read more…Hi guys, in these days I've been flying with a beta version 3.4-dev (9a09a86b). The reason why I'm using it instead the released 3.3.3 is because I found it more "stable". As soon as I upgraded to 3.3.3 the position controls happened to be very nervo
Read more…Hi guys, I've executed a planned mission in my quad.
This mission included some camera shot.
I've converted bin log into txt format, but I don't understand where I can find GPS coordinate of camera shutter.
I see many parameters, fore example: FMT, P
Hi friends i have one problem,my pixhawk connect a mission planner, the red indicate flash constantly,i format the SD card but no use,then i connect the mission planner but not connect,please how to solve the problem...
I received my APM 2.6 control and downloaded both Mission Planner and Apm Planner.
Mission Planner seems to work but each time I try APM planner I get the message that dome .DLL files are missing like Q+5GUI.dll
Any ideas on this?
Thanks
Read more…My quad crash while landing in auto mode I checked log and it seems there was change in Gyro reading before crash. Someone can check logs and identify its cause. In this carsh my Tattu battery catch fire after crash. soon i share video I used 3DR pix
Read more…I am developing my own flight controller board using the STM32f103RE, the same CPU that the flymaple board uses.
However, I am using an MPU6000 on SPI so I am using the AP_InertialSensor_MPU6000.cpp file. Monitoring the output using UART, everything l
Read more…I bought a Bluetooth module to connect to my telemetry radio.
Can someone please help me identify the TX and RX on this module?
On the back side of the radio it does say DTX DRX but they dont seem to sending any signals.
My solo flipped and destroyed the propellers on my first attempt at flying it. Contacted solo .they wanted my logs I sent them 3 times and have been waiting for days to hear from someone at solo. After paying $1500.00 for the solo, I'm starting to g
Read more…hi folks,
want to share with you this new frames i found.
FC6-900 - hexacopter, carbon monocoque , 900mm diameter , pluggable arms, dust- and rain proofed, weight without battery 1800g, 1 x 6s - 10.000 mah, flighttime with 5kg. take of weight up to 30
Read more…Hello friends, I am working on a project that requires 8 motors to be used like an octo 8X but in an 8+ config. I just realized that mission planner did not offer that config. Is it possible to set it up manually in arducopter parameters? Or, can I j
Read more…Hello to the forum.
I am a survey Engineer and new to pixhawk and to RC General.
I already post the same question here:
but i don't know
Read more…After spending 3 days reading and downloading apps, I thought I was ready to fly my solo. Went out in the yard and set solo on the ground. (Level ground). I tapped the fly button and the motor started. When I tapped the fly button again, the drone fl
Read more…I am new to quadcopter and RC world.
I buy from ebay my kit and built my quadcopter assembling all the parts following various instructions from various websites.
I buy this kit to build for my son and up to date I have not see the quadcopter running.
T
Read more…Hi.
When i armed the pixhawk to run, i move throttle stick to up small movment, motors start to spin and rpm increase without any control . Motor spin is very fast in stabilize mode and indoor witht prop on motors. THR_MIN default 130 and MOT_SPIN_ARM
Hello,
I am implementing ardupilot source code on PX4 board, and follow this article to get information from sensor and display on console window: http://dev.ardupilot.com/wiki/learning-ardupilot-the-example-sketches/
But recently, I can not run these
Read more…I am using a Iris+ with the Tower App.
Is there anything that tells what each of the parameters is?
I would like to set a default speed for waypoints instead of setting each waypoint speed individually.
Read more…Hi Everyone,I am using apm plane v3.5.0 with MP v1.3.37. With regard to the geotagging, the ability to adjust the log offsets has been removed in this version of MP, so I'm not entirely sure which altitude is being used when geotagging.When the AMSL
Read more…A small clip from the high efficiency quad using 29 inch 3 blades props running of U8 135KV motors and 6S batteries.
The setup delivers ~35 min with 16,000 6S lipo and 1.8 Kg useful payload.
More scope for extended endurance beyond 40 minutes with la
Read more…I have an X8-M and PixHawk. Last year everything worked fine when I was flying autopilot missions and the camera would automatically take pictures. This year I went to test it after doing software updates and the autopilot doesn’t take pictures. I
Read more…