Don't know if this has been thought of and dismissed or not. How about using the IMU as an INS.
I think most of us are expecting higher accuracy than is possible while keeping cost down. We also have a problem with perception of error due to scale. B
Read more…Hi, I am currently doing a project of drone to loiter in an indoor environment where GPS is unavailable. In this case, I use POZYX to do my indoor positioning and followed the steps on ardupilot website (http://ardupilot.org/copter/docs/common-pozyx.
Read more…Hello , i am using arducopter 2.8 4 motor drone. i need to fly this drone pre defined indoor position without RC. can do this ?
Read more…Hi there,
I’m doing indoor autonomous drone with pozyx indoor positioning system as sensor and I wonder if anyone know after configuration pozyx with ground station( Q ground), do I need to add anything in the code(which is sent to raspberry Pi) to m
Read more…I am someone new to the drone building community and would like some guidnace regarding it. My goal is to make an automated fixed-wing drone capable of carrying some load. I know thats a very hard thing to do but I have to start somewhere is anyone w
Read more…At present, drones are more and more integrated into daily production and life, and the scope of application has been widely expanded, becoming high-tech equipment with full affinity. Industrial-grade drones have been used in many fields such as agri
Read more…Hello,
i am going to build an agriculture hexacopter with pixhawk flight controller .
The payload should be about 6kg
I already bought the skydroid t10 as transmitter/receiver, and 6 motors EA55 KV320 that have max current absortion 53A and maximum powe
Read more…Hello guys,
I have a problem with one motor, do not spin and making a sound (videos in attachment), I changed the motor to another ESC and is work, so I checked the connections on ESC and all connections looking great. any ideas or something I can do,
Read more…Hello guys,
We proudly present our brand-new product; the AgroCam NDVI upgrade kit for Yuneec H520.
The NDVI camera replaces the original one and it also provides a telemetry link. The kit completely integrates into the drone's system and the drone can
The topic from: Top drone parts companies
ESC stands for Electronic Speed Controller, and they control the speed of the motors in drone. The ESC receives throttle signals from the flight controller, and drives
Read more…Hi Friends I wnated to discusss if Electronic Fuel Injectors a must for any rc gas plane going to high altitude(say upto5000m from 1500m). In second WW there were no fuel injectors and I am sure the plane flew pretty high. So why is this a compulsion
Read more…Hello, everyone, I have a question fo those that have build their own platform from scratch, given a set altitude that I want to mainly fly in with a given power system. How do I find which airfoil would work best for the altitude I want to fly in an
Read more…Now that we have version 2.9 and inertial primary control for the Z axis and soon to have it for X and Y axes as well it is necessary to take vibration dampening and isolation of the flight control board much more seriously.
Primary improvements can c
Read more…Dear Friends,
I apologise for being quite off topic but as you probably already know, the ordinary propeller guards for the “ordinary” Parrot ANAFI drone are not compatibile with the ANAFI FPV (or ANAFI Thermal) as the relevant legs are different.
Coul
Read more…I recently Pixhawked a DJI S1000 and while it does fly, I find it very hard to maintain control of. I've been meaning to do the auto tune but I don't quite yet trust it not to fly away or crash, both of which it has done on its own. I've been flying
Read more…Hello all,
My name is Ben and I am PhD researcher from the UK. To outline my work very briefly, I am conducting research into the use of drones in tropical forest conservation and ecology, with a focus on the potential socio-cultural impacts that such
Read more…Just wondering if it would be safe to do a compass calibration on one of many identical drones in one location and then copy those values to the other drones without needing to calibrate all the drones? Should the values be identical if the drones a
Read more…looking for some recommendations on the items I need
This is what a currently have ready for a aerial Drone
4 4000 mah 6 s batteries
1 Tarot Carbon Fiber Frame FY690S TL68C01
6 4910 380KV motors with props
1 Sony A 3600 DSLR Camera
Could you recomme
Read more…Hello all. I've been operating quadcopters (and a hexacopter!) for a couple of years now for my company, and lately I've encountered a new challenge that such vehicles are not capable of performing.
I have arrays of photovoltaics that have serial numb
