Just as the title say, I am going to connect an APM to a DJI f450 kit. I know that the APM can distrubute the power to the ESC's that are connected to it.
I just want to make sure that if I connected the ESC's to the APM, I wont need to solder the ESC
Read more…Merry Christmas everyone,
I am building an octocopter using pixhawk as flight controller and I am having some issues buying an RC transmitter and receiver set. I have the telemetry kit for pixhawk from 3DR and I was wondering if I can use that along w
Read more…I had a crash flying a big wing (Skywalker x8), when I hit the RTL switch, the plane started to pitch/roll wildly and crashed. The plane was flying at 30 meters, and the RTL altitude was set to 100 meters. I have posted the log. If anyone is able to
Read more…Hi everyone!
I would be glad if someone can help me with logging my own variables in log with possibility to take it from dataflash after flight.
I have found some code strings in Log.pde, but changing it doesnt bring any result.
Sorry if this question
I have connected my 4s lipo to my power analyzer input and the analyzer's output to my 3dr power module. My question is about the values generated by the power analyzer. It has 4 fields:
top left: amps top
Read more…I've been trying to identify certain toggle switches that would allow me to flip a switch or toggle a button in order to power on my quadcopter instead of having to constantly plug and unplug my battery's xt60/90 connectors. So, I think there are 2
Read more…i upload firmware to AC 3.3.2, when i connected to Mission Planner, MP shown the message as image, i have no idea about this, does anyone have same issue?
thanks
Italy already has very strict and severe rules.
What happened during Madonna di Campiglio, Italy, Men's Slalom
(low temperatures and dead batteries I suppose ? )
Will be very bad for drones ...
http://media2.corriere.it/corriere/content/2015/12/22/Sport/
Read more…Hey guys,I'm trying to run an xbee HP telemetry kit with the pixfalcon, but somehow i can't seem to get it to work, it dosn't allow.me to download the full parameter list from the puxfalcon. The Xbee works fine with the pixhack, just not with the pix
Read more…Hi everyone!
I'm a software engineering student and my graduation project deals with programming a software for obstacles avoidance for a 3DR Pixhawk based drone.
Soon I'm going to have the Lidar-Lite 2 sensor I ordered for this, and now i'm starting t
Read more…I like to share.When the radios stop connecting, a person wonders where to start trouble shooting!!! Long story shorten.... I had the system working in my flying wing (only 2 micro servos). Moved the complete system to a Glider which has 6 SERVOS!!!
Read more…What is DGPS Differential GPS? How can it work? DGPS PDF
Presentation
Improve exactness in finding your vehicle? Improve precision in working of your GPS? At that point we have an answer for your issues. Today we will acquaint you with the propelled fo
Read more…I have upgraded to a 1 watt radio, but even with good dipole antennas I am only getting around 800 meters through trees and buildings (much more when up in the air of course). Better antennas may help, but I am considering using more power and 5 watt
Read more…I'm having some trouble with my first pixhawk plane (but my 5th arduplane!).
I have very fast throttle and desired pitch micro oscillations. I did the auto tune then tried to adjust the TECS settings for climb rate (lowered it since it couldn't manage
Read more…Hi all, I have had this problem which is driving me mad. its happened twice now.
Note I posted this on APM but had no response.
The thing I am confused about as you will see below and from log. The DesRoll, Roll, DesPitch, Pitch, DesYaw, Yaw and Des Al
Read more…I have a minimosd in an airplane. Latest firmware in my Pixhawk.
Is there a way to display how high you are flying above the ground (or home position)? Currently I only see MSL altitude and Home Altitude which is not that useful to me.
The Mission Plan
Read more…Can anyone provide the link of stable pixhawk firmware ??
Read more…
A Low Cost, Open Source Streaming Thermal Camera
We've come up with a simple, low cost, open source streaming thermal camera that runs on Raspberry Pi. The system is based on the SEEK Thermal Camera which offers 204x156 resolution.
The thermal images
Read more…We've come up with a simple, low cost, open source streaming thermal camera that runs on Raspberry Pi. The system is based on the SEEK Thermal Camera which offers 204x156 resolution.
A Low Cost, Open Source Streaming Thermal Camera
The thermal images
Read more…
We've come up with a simple, low cost, open source streaming thermal camera that runs on Raspberry Pi. The system is based on the SEEK Thermal Camera which offers 204x156 resolution.
The thermal images are streamed using MJPEG, and can be viewed wit
Read more…