I am going to assume as various google searches drew a blank that this doesnt exist ??
But with the tight confines of building a system into the bowels of a plane, even a large plane like the skywalker I am tinkering with, the access becomes a not in
I always try to search through all forums before asking but this time I am completely baffled. First Im using an APM2.7 and arducopter 3.1.5. After a crash I reconnected everything as they were since apparently they weren't damaged. I recalibrated ev
Read more…Hi,
i have a Problem with my quad. So the quad was flying really really good, but then i realized that i have a hardware problem (this one here: http://diydrones.com/forum/topics/pixhawk-bad-accel-health-apm-3-2-collecting-data?id=705844%3ATopic%3A185
Read more…Hello, I 'm having trouble with the latest Arduplane V3.3.0 (6be0932d).
Got a Pixhawk (so far working perfectly on a quad) and flashed it with the above Arduplane version. Connected to MP to be told "Bad or No Terrain Data".
Google pointed me to the Te
Read more…Hey all,
A quick question with hopefully an easy solution. This is my first APM unit. It is a 2.6 clone running 3.2.1 FW. I had it all set up and running this afternoon. Had the GPS mounted on the frame. It would arm and fly no prob. Had it dialed in
Read more…Hi.. I realize this is a basic and confused as it comes but I purchased a 'full' package of pixhawk setup, to put into a fixed wing platform and am now a bit baffled by the connections which dont seem to correspond to some things I am finding online.
Read more…Dear all,
I am using AP3.3.
How is it possible to get on the camera trigger channel other PWM than the CAM_SERVO_OFF and CAM_SERVO_ON?
Many thanks in advance!
Tom
Read more…I have been reviewing this .tlog all morning and am completely stumped. Any help would be greatly appreciated.
Unfortunately it wont let me download the data flash logs off the pixhawk for some reason, I will try pulling the SD Card later and seeing i
Read more…So I have tested quite a few different platforms to use for UAV work, including a few flying wings, but, I can not seem to understand why in the SUAS world so many platforms are flying wings?
From my testing here are the pro's and con's I have found:
P
Read more…Hi all, in the middle of building my first quad and would like to use ppm from my receiver to my apm 2.6 pro mini. The controler is the small unit with side posts, 24 pins on each side and no white connectors for I2c or telem etc.. I havent found o
Read more…Seeing tons of messages for EKF on my APM2.6. No idea why? Also the logging is set to Default + IMU, but it doesn't seem to be recording that data? Are the two problems linked? It's 3.2.1 I'm on.
Read more…Hi all,
I am looking for advice from someone with experience using KDE ESC's with Pixhawk. I know from this APM page that I am to manually set RC1_MIN/RC1_MAX ... RC6_MIN/RC6_MAX to 1100 and 1900, respectively (this is a hex):
Read more…The KDE ESCs have fixed P
Here is a scenario I have been wondering about: I plan to shoot some friends mountain biking down a hillside. So, I arm and take off at the top of the hill, follow them close behind at about 15m alt above them, but of course, although the altitude ab
Read more…Hi there,
this is my first Blog post here. I am writing this because i was not able to find a lot on how to add an alexmos controller to the Walkera G-3D Gimbal (other than there is a mysterious guy called "Mat Kimm" who sells "tuned" Walkera Gimbals
Read more…I see the Guidance system from DJI supports UART - does this mean we can rig it up to Pixhawk?
Won't the problem be the protocols? I assume they will be DJI proprietary...
Read more…Alternately, I know the E384 basically does what I'm looking for, but I have an IRIS+ with a Pixhawk I'm quite happy with, but it's unclear to me if the APM in the E384 is really a significant difference.
thanks for any help!
Read more…Hi Everyone,
I am trying to find out if there is someone in particular that you would recommend talking to at 3D Robotics. I placed an order for 3 X8+ drones at the beginning of May as I needed vehicles that could carry a larger payload. The website
Read more…Is the a way to see that sonars, connected to a Pixhawk, are working?
I have been through all parameters in "Status" without success.
Thanks
Anders
Read more…The motor 4 output on my friend's Pixhawk seems to be dead. We tested it with multiple ESCs and servos just to be sure.
He's setting up a quad, so I was considering taking the sketchy route and flashing X8 to use outputs 5-8, but before we resort to t
Read more…Hey Guys. Just in the process of cleaning up some excess products that we have but are not presently using. We have available
1x Original Pixhawk (Used / Working) Unit Only - $100 USD
1x Original Pixhawk (Used / Not Working - 2 blue lights at boot) Uni
Read more…