Hi Guys,
My company recently received our FAA Exemption using the 3DR Aero-M and X8+for Agricultural survey and monitoring. We are Aerial Precision Survey located in Idaho. I am hoping to connect with others who are using these platforms for Ag use or
Read more…I started into quads last year with Quanum Nova. aka Cheerson CX20. While I enjoyed a few flights, I also had times where I was not in control and ultimately the beast flew off on its own and I just let it go. I did learn the basics during this somew
Read more…Is there a flag or parameter anywhere in MP that will allow me to confirm that Terrain Following is active after commencing the mission? I had a "Hey. I can see treetops in the video." moment today when I sent my plane off towards the local mountain
Read more…I live in New York and I'm looking to build a quad-copter mostly for fun but am also interested in its commercial use. Is it legal/practical to make a drone at home for commercial photography?
Read more…No problems in flight to mention but got a strange problem on the gimbal (nothing to do with the Pixhawk).
whilst looking at the logs I noticed more vibration than normal (at least from what I can remember) The soundtrack on the camera also makes me t
Read more…Hi,
I saved the draft of a part written new blog earlier and subsequently found it had been approved and published.
I have deleted the blog but seems like that should not have happened?
Thanks
Read more…Hello all, i want make some project, i would capture some place or area if the my plane is fly. then after capture the picture i can show the picture in GCS Mission Planner. now i use APM 2.5, Maybe one of you can help me, please. Thanx before
Read more…I flew my FX-61 with the X8 the params. The flight went ok. My question: I need to Auto-Tune the FX 61, will it tune with the X8 params loaded or do I need to load some say ... default params and then do a Auto Tune??
Thanks, Brian
Read more…Can somebody help me with following problem ?
Today was relatively bad wind and I flew in loiter/stab with my Y6B and everything was ok. But during second flight copter start do circles in loiter. You can see them as perfect sinuses on end of chart. I
Read more…Hi Guys,
I need some help
I have a plane that is tuned nicely and flying very well. Last weekend I did a endurance test and changed the battery for a much larger one. This shifted the CG forward a bit. On Auto takeoff I noticed that the plane wanted to
Read more…Noooooo...
It's not often I get stuck, but I am!
Got me an overpowered Y6. It's running 3.2.1, Y6B model. 11" CF props all round. rcx 2814-9 (800kv), on 6S. 420mm size, 2.8kg AUW.
It flies ok...as long as you don't yaw. It yaws too aggressively in one d
This is a discussion related to the Copter development priority debate that popped on the Copter-3.3 beta testing thread. A quick categorization of the things we work on in each release include:
Hello,
In my search for a Lidar device for my Android telemetry system I have been testing both the Lidar Lite from PulsedLight (http://pulsedlight3d.com/) and the SF10/B from LightWare (http://www.lightware.co.za/shop/en/rangefinders-and-altimeters/3
Read more…Hi all,
I recently changed the rubber mounts on my Pixhawk mount as my vibes were exceeding the recommended limits, this has made them worse so I'll revert or try something else. However I've been getting some slow loop lines in auto log analysis and
Read more…I am trying to get a shadow copy of all commands going from Mission Planner to my vehicle via MavProxy. To do so, I added a second link (using "link add") to MavProxy which I am routing to my monitor software. However, it seems that MavProxy will onl
Read more…Hello friends,Read more…
I have a FY650 Tarot with 4 motors 4108 360kv using a Pixhawk as Flight Controller and Arducopter 3.2 firmware.
It turns out that when I trigger the RTL the drone comes to the Home position correctly, and when will make
I recently finished my quadcopter. It is a big one. 120cm in diameter, about 5kg of weight and it runs 28 inch propellers driven by four Tiger Motor U8-16 100kv motors with a 6 cell LiPo. Im using PixHawk with Arducopter 3.2.1.
It is almost impossibl
hi, i need some help on this issue. i tried to interface linkitone board with apm2.5/2.6 through telemetry port. the serial monitor for linkitone doesnt show anything when receiving data from apm2.5/2.6. may i know how and what can i do to resolve th
Read more…Wanted to buy: Revoelectric MPA charging board. US seller please. Thanks for looking.
Read more…Can anyone tell me the difference between a T-Motor U7 490kv and a U7 v2.0 490kv, besides the prop adapter bolt pattern?
Thanks!
Read more…