Hello guys,
I am building a survey and i have hundreds of waypoints which I save on a text file from within Mission Planner.
Any way to simply export that waypoint text file to Google Earth please ? Or anyway to convert that text file to a KML file ?
Read more…2. What does the "FMT"Hi All,
After solving some small things I tried to do the Auto Tune procedure whose prerequisite is getting the quad to fly well in AltHold. Well, it sis not! As soon as I flipped into AltHold the machine shot up about 20 feet,
Read more…what is the unit of roll,pitch, and yaw recorded in ATT after logging files from APM 2.6
Read more…Hi, this is the first time I have posted on here so hope its the right place. I have been battling to load the XP firmware onto the D8R 2 Plus receiver to get CPPM and was hoping someone could point out what stupid mistake I am making.
I found out tha
I have recently added a parameter to Ardupilot using http://dev.ardupilot.com/wiki/code-overview-adding-a-new-parameter/ as a guideline. Somewhere on these boards I then found that I also needed to change the parameterdata.xml file in my Mission Plan
Read more…I wanted to be able to use Google Earth's time slider to walk through some recent flight data. The other KML export tools I saw didn't use KML's gx:Track extension. That extension is fairly efficient, and Google Earth's time slider is enabled if ti
Read more…Hi Guys,
APM2.6 + AP3.2 + Canon S110 + CHDK + Gentles wire + modified KAP_UAV.lua is what I am using.
this way I should have 6 paramateres I can set remotely. Ch1 is set to RC7 and CH2 is set to RC6 as I was unable to get reliable signal from A9.
At
Read more…Hi All,
I haven't used the auto camera trigger function for a long while and went to set it up in arducopter 3.15, however it doesn't seem to be available anymore, or maybe I am missing it!
How do I program the apm to take a photo when reaching each wa
Read more…HI I can't go to follow me window. I am using Samsaung Note 3 phone. Can go to side addition panel but can not continue to follow me. Tutorial video from 3dr look like jumping step. Any advice or video I can look at it.
Thanks
Eddie
Read more…Download the logs here (27megs) and help yourself to the pics that were recovered, you are looking for the body of a missing woman named Cristina Morris.
All information needed is in the logs. There are two flights, one very short and one that lasts
Read more…hey everyone, i have my Quadcopter with APM2.6 , and Turnigy 1000kv motors,
and been having a stability problem where the Quad hovered but kept trying to roll to the right with some clockwise-yaw no matter what i do.
i re-calibrated the Accelerometre
Read more…Thank you for making me a member of this forum. I am an electric bike builder and longtime member of www.endless-sphere.com/forums which is another free forum discussing light electric vehicle transportation. In 2005 began my search for energy indep
Read more…I am trying to understand what is the best way to power 2 servo's on a flying wing that will be used as the platform for learning Mission Planner and APM:Plane
I plan to use 2 digital micro servo's and power them off the ESC's BEC. I was planning to u
Read more…Hell all
I have a problem with POSHOLD.
I have set the quad up as best I can. It flies very stable and Stabilize mode. and is very responsive.
When switching to POSHOD it starts to bounce up and down. Motors quick accelerate and decelerate. moving copte
Read more…If someone actually succeeds to give me a proper solution other than "buy a new APM" (or maybe that may be the correct answer in the end), I will happily give some dollars to him as HobbyKing bonus points (I can do that right? I have heard that it's
Read more…Hi All,
Today I took my F450 for its first test flight ever, in Stabilize mode. It was windy, gusting to 15 but it was OK except that the wind caused it to oscillate about 10 - 15 degrees. The wind was running left to right, quad was nose out, and t
Read more…hello developpers
There is a small but nasty error, if i connect several boards to the apm planner, i might have the old connection stored above, if i press connect before adjusting baud and port, i always get an error,
i always recognize too late and
Read more…Came across this project on kickstarter.https://www.kickstarter.com/projects/794458221/long-range-hd-fpv-telemetry-over-wifiI find it a little too incredible, basically this chap is saying he can achieve data wifi (even over 900mhz? Must be a new wif
Read more…I have a second Pixhawk and uBlox for my rover project. It stands absolutely fixed close to a window but in the Fligt Data sceen of Mission planner it looks asthe rover is shaking, tilting and turning. Sometimes it looks as I'm rolling and looping. I
Read more…Hi guys,
I am currently working on a log and UAV personnel management system for my company(and the community) and I would love to have your input.
I have so far christened the application TechLog because of its association with the opensource Techpod
