Hi all,
Quick question: if I can connect two identical and balanced batteries to my Y6 in parallel using an XT60 Y-connector, could I connect four identical and balanced batteries in parallel using 3 Y-connectors?
Let's assume I have the lift capacity
Read more…Hello Everyone,
I have for sale 6 motor/esc combos. The motors are the larger motors from DIYDrones at 880 kV. Associated with that are the DIYDrones ESC units. They are all in working order. I am asking 35.00 per motor and esc pair....however would
This picture currently on googlehybrid. As I zoom in, it just looks blurry. Unfinished tiles ??
This happens on a view others. I can go on yahoo maps, but it's not as detailed as google.
Any solutions? I'd like to use google maps. GoogleSatellite view
Read more…I experienced some trouble in loiter then guided mode today. I'm using the px4 and when u switch to loiter u can use the guided flight mode from there. When I right clicked and selected a fly to here position on the map the altitude option came up an
Read more…Hi all,
I have unexpected problem with my new quadrocopter with the pixhawk.
If I switch to the ALThold mode during the flight the copter became a rocket. It climbes on the full trottle until I switch it back to stabilaze mode. I cant find the problem
Read more…I flew my plan the first time and it works great in Loiter and RTB plus go to here function but the flight plan grid input does not control the plane
Read more…I've got a 3DR x8 with a FrSky d4r-ii receiver and Turnigy 9xr tx. I've got everything working except the failsafe. I've followed the instructions on this video
https://www.youtube.com/watch?v=FhKREgqjCpM
When I turn off my Tx while testing the failsa
Read more…I'm curious -- can anyone explain what this is all about: http://recrute.parrot.com/en/details-offre.php?id=2865 ?
Read more…Hi everyone,
I've just been introduced to this challenge (http://www.wcuavc.com/) which basically is focused on the development of drones for rhino/elephant anti-poaching in Africa. I'm presently leaving in South Africa - where the challenge will take
Read more…Hi everyone,I apologize if I'm missing something obvious, but where is the option to reverse servos in APM Planner 2? The documentation for Mission Planner shows checkboxes on the radio calibration screen, but I don't see anything equivalent in APM P
Read more…Hi,
I have a PixHawk and have some questions about the power configuration. There seems to be some confusion (as least for me) as to the best method and practices. I find most of the documentation and diagrams talks about APM, but hasn't been fully up
Read more…I have done several searches on this subject, and it seems their is some conflicting information.
Currently I have a Pixhawk running what I think is the latest firmware, and trying to set up the minim osd. When I initially connected the 3dr radio to t
Read more…It looks pretty good, but don't know will it open source the PCB files.
A little confused on setup.
1) Can I run Helicopter mode H1 on the my transmitter?
I like the menu options with Helicopter mode on my transmitter rather than Airplane mode.
2) Hooking up the ESC to the Pixhawk channel 8 output.
There is no "Mode Set 1
Read more…Guys i need a little help on this as I am having a little trouble finding the right answer in the search. All of the videos on compass motor calibration say go to terminal. In the mission planner 1.3.5 i see no terminal in the normal location. On
Read more…Hello there,
I found an additional port on Pixhawk board scheme and came up with idea to connect a higher performance IMU (mostly accel and gyro) to autopilot in terms of my master thesis. My budget allows me to buy the system below 200$.
After making
Read more…I am having some issues with my new ground control set up and I think it might have to do with the fact I'm using and older APM 2.5 with arduplane 2.72 firmware. That is a new Mac so must run APM Planner. I like it but it doesn't seem to work %100 ri
Read more…I'm currently running a APM 2.5+ board on a skywalker 1880. Due to tightly packed electronics, occasionally the compass will give out bad reading and the "BAD Compass Health" warning will show on mission planner's HUD. Despite the error, the plane st
Read more…The latest firmware has a new feature that's suppose to make this possible but the documentation is not yet available. Has anyone been able to figure it out?
I have an airplane that's setup with dual differential ailerons using transmitter differenti
Read more…Hi,
We are having temperatures here as high as 45°C and lows around 28°C. This makes me wonder about what's the high temperature threshold of APM & Pixhawk or any other FCs like naza or multiWii?
Will it be safe for FC, ESC and motor to fly in such hot
Read more…