Looking around for a gopro 2 axes gimbal, allmost every mount comes without servo's.
What are the best servo's to be used with arducopter so that the gimbal runs very smooth.
Read more…Hi guys,
Tried 2.4.1 today on my 3DR Quad with stock motor and props, using parameter file for stock quad.
First flight was fine. Stabilize and Loiter working. After swapping battery and taking off the yaw started to drift clockwise at about 1 degree/s
Read more…I's like to add some code to:
void setup() {
memcheck_init();
//....my code here
init_ardupilot();
}
the code should initialize some other hardware, basically just use some output pins for 15sec. - before the Arduplane boots and works normally.
How can I *
Read more…The same thing can be achieved with RC Arial photography believe me. Ok, maybe not quite the same but you get the idea, please let me know your thoughts.
http://www.graphicdisplayworld.com/e...onsumables/958
Kristian
Hello,
I have an ArduQuad, but I am interested in next building a Hexa for FPV and have been using Ecalc for modelling. I live in CO, high altitude and have found that via Ecalc, props sized in 13" and 14" return better performances (longer flight). S
Read more…Now that the CLI has been done away with on Arduplane 2.something-or-other, does anyone know whether on-board data is still being automatically recordered in flash and, if so, how do we access it now?
Also, if I'm running HIL, does the above still app
Read more…Hello
I see there is a lot of talk about the communication between XBee Pro 900 XSC RPSMA and XBee 1mW Wire Antenna - Series 1 some said one has se both devices and the firmware on the APM 1 to 9600 and other said download the latest firmware and uplo
Read more…Hi Everyone,
Will the default PIDs for the Quad work for the Hexa using the purple motors and 10" props? Or will some tuning be involved because of the frame change and two extra motors?
Read more…Hello everyone,
I am trying to refetch a certain area on the map as no internet on the field, it says to hold the alt key down
and presumably click the mouse but no matter what i do it will not draw a box around the area i need
then prefetch just keeps
Read more…Hi Michael,
Is it possible to get gps NMEA out from Mission Planner on some port for driving tracking antenna or other software?
Ahmed
Read more…Hi,
My arducopter board is doing strange thigs. After I used the openpilot cc board on my quad for several months and got a reliable stabel flight and hover, I bought the arducopter board as it had the altimeter and gps.
My sun and I spent a week of s
i loaded the new 2.4.1 on my quad with APM1 and when i do the motors test it spins motor 1 fast then motor 4 and then 2 and it spind 2 for about 5 sec... i am setup in X...
Read more…Haven't used Arduino to compile any code for a long time, but had no issues in the past.
First problem: need help with ArduPlane 2.2.8, it won't compile in (the latest) Arduino environment, even if I did not touch the APM2 code at all. It has about a
Read more…I know there have been several threads related to this but I have no found a definitive build log or instruction. I'm designing a UAV and weighing my options for autopilot, telemetry, and OSD. Since the Ardupilot coupled with Xbee can allow RC cont
Read more…I've entered declintion.
When I point my plane to what it thinks is west, one would think the east would be in perfectly opposite direction, no , east is almost 40degree off. Same, but smaller error in north-south direction.
Throttle have no influenc
Read more…Guys
Iv seen a few people that is haveing trouble compiling the ArduPlane and ArduCopter code with Arduino 22 relax , Arduino 100 relax .
always seems to be ether"bootlean not declared" or "AP_int16 not name a type "
Any of one that got this working
Read more…Hello everyone,
Am just starting a large hexacopter project and a bit stuck due to being on a budget can anyone tell me any other material they have used fro the main body other than carbon fiber, i am using aluminium arms
and my main stack body will
Read more…Hello, I've seen other ground stations as HK. have the function of managing a system.tracking antenna.
I wondered if APM Mission Planner has this function or are in the pipeline to implement in the future.
...can I pull off the switch block and wire/configure these ports as outputs to control my HD170 camera by pushing it's buttons via software on the APM?
I plan to power the HD170 over its USB port, tying it to the ground of the APM so I'm assuming the
Read more…Hello, how can i calibrate the Magnetometer in the mission Planner or in the Terminal?
I don't find a setup point in the Terminal like "c - Compass offset calibration"
Or is it no more necessarily, for the moment the indicate is o.k. +/- 10 degree.
Tha
Read more…