I have run in to the following problem with ardupilot mega :
I have installed ArduPilotMega1.02 and 2.1 and got the same problem.
Setup the radio and configured the first 4 channels.
Setup the modes and configures channel 5 to be my mode switcher (Manua
Read more…I have installed ArduPilotMega1.02 and 2.1 and got the same problem.
Setup the radio and configured the first 4 channels.
Setup the modes and configures channel 5 to be my mode switcher (Manua
Why is the "datetime" value always blank in the status screen? Can it be turned on?
See attached pdf to see the "datetime" location.
Read more…After reading about it here in the forums:
http://diydrones.com/forum/topics/mb1000-lvmaxsonarez0-vs-mb1200
I installed an LV-MaxSonar EZ0 MB1000 sonar sensor.
It does not appear to work. When I test it, it just says 700 cm and does not change,
I have
Read more…Hello, I know these Xbees are not officially supported but I was wondering if anybody has had success using them with the recent Mission Planner.
I have the XB24P (not the zig bee) and I can succesfully connect via CLI on the Arduino Serial Monitor.
I
Read more…I would like to know how does a optical flow/mouse sensor go about stabilizing or controlling the position of a flying machine? Any useful links on optical flow/mouse sensor are also welcome.
Read more…I have an APM board that I just tried to get up and running tonight again after it was working but am now having issues. I updated to the latest MP and tried to download the code to the APM, it said it failed. Now everytime I try to update the firmwa
Read more…I flew the quad for a good 10 minutes, changes the battery and played around hovering.
I flicked the CH5 switch to go from Stabile to Loiter.
Immediately, the craft flipped over and burrowed in to the ground.
I broke a motr, a motor mount and a prop.
Ma
Read more…Wich parameter do i have to change to get the Copter more faster on RC inputs?Read more…
I have to pull full forward to move forward, backwards its fast enough.
Flight is stable.
Thanks,
heckmic
When displaying a flight plan with non WP commands these are drawn as waypoints with position lon 0 lat 0 in the Fligt Data tab. In the Flight Planner window it looks ok. See the attached images.
I have also attached my waypoint file.
/Magnus
Read more…
Help me! After initialization, only the B LED is lit continuously. Can not connect to cable sem.Nagyon slowly read the parameters, but then throws an error. What to do? ARDU I killed for? Welcome Joe Sorry for the lack of English for knowledge:)
Read more…What ground control station do you use for your unmanned/autonomous ground vehicle?
What customizations have you made?
Reason I ask... I am contemplating a GCS for Data Bus my Sparkfun AVC entry. Been surveying what options exist. Just started playin
Read more…I just updated to MP 1.0.71, but now when I try update in MP Help I get this error. Do we need to download a new MP now for updates?
Read more…
Hi All,I am having an annoying problem with XBee. After upgrading to Arduplane 2.24, I am having trouble getting the Xbees to connect.When I hit connect on the GCS, I get the message that it is loading "mavlink parameters (sysparams 1, compid 1)" the
Read more…Ran into an issue on friday, when I have my voltage sensor connected the gyros tumble when at high rpms. the problem goes away completely when the voltage is unplugged, so I know it's not just vibration.
Anyone else see this before?
Read more…Can the Ardupilot Mega board drive two escs per channel on the APM?
Thanks :)
Read more…I've managed to get my ac together and in nice trim. It is very smooth to hover, but i have two weird issues with flight.
First one is with forward flight; in stabilize, simple and alt hold modes when i start to accelerate forward, the copter suddenly
Read more…Well it's a sad weekend. On Friday my Skwalker had a second catastrophic nose dive and I lost it somewhere over a marsh. Scanning the area with a FPV had no success.
I've made peace with the loss, I'm just trying to understand what caused the nose di
Hi all,
I'm making a led lightshow for my hexa by letting the brain control ledstrips on the 6 arms. However I need some help concerning the available hardware output pins.
What do the pins on the bottom, next to the dipswitches, do in the following
Read more…Hi all, I just finished installing beta 42 into my older apm, and after doing all my configs , when I plug in my lipo in fly mode I get :
Motor ESC chimes (indicating 3s) - one more beep means ready
the APM then inits (A and C are strobing very fast) f
Read more…