Hi-
Im looking for my next airframe. Rite now I fly the Dynam Hawk Sky. Its very docile and forgiving. Im looking to find an airframe with good lifting capability and high endurance. I plan on using APM, Mediatek GPS, wireless xbee900's, Standard radi
Read more…this is my configuration:motors: TR 28-30B 14A 1050Kv Brushless OutrunnerESC: HobbyKing 20A BlueSeries Brushless Speed ControllerArduPilot Mega: Arduino Compatible UAV Controller w/ ATMega1280ArduPilotMega: IMU Shield/OilPan Rev-H (With Pins)Magnetom
Read more…Hello everyone,
I recently bought 4 brushless motors and 4 brushless controllers (here : http://store.jdrones.com/product_p/acesc20amp.htm). I would like to control the motors' speed with a PIC.
So, I put a 5v signal into my controller during 1ms and
hello,
i am using a Gyro LISY300AL with dspic30f4011 ( the same development plate from sparkfun),
how can i convert adc result from gyro to SI unit, for example to rad/sec.
resolution of adc is 10 bit,
and the sensetivity o
Read more…Hi,
I am running the latest flight software version (RC2 Beta). I didn't test flight it yet, in fact i didn't mount the props yet.
I am managing to arm the Arducopter and everything seems to be fine: The roll, the pitch.. - except one thing.. when i m
Read more…hi-
is the altitude/elev of 649 ft dispayed below from the gps?
Can eye altitude be adjusted?
Which version of HK GCS is this?
Im having troubles with altitudes and im trying to narrow down the error.
Thanks
Erik
Read more…Hi,
I'm looking at a project that needs a camera with an interval timer, and am thinking that a canon camera that supports CHDK could be a good way of getting the features i want. Does anyone have any experience with this, and if so could you write a
Read more…Hi I have an LSM303DLH Magnetometer i got from Sparkfun (http://www.sparkfun.com/products/9810)
and my GPS is the FV08 or EB85 by SANJOSE
I used the tinygps library for obtaining the GPS dataand I got another library for my magnetometer
Problem is when
Read more…Friends first of all thanks for reading this question.....
Actually i need to generate a PWM signal of frequency near about 40 Hz with the help of Atmega 8 microcontroller ,it is easily done with the help of following program
void setup() {
Read more…Can anyone recommend a polyurethane supplier that can supply the kind of PU needed to make blimp envelopes?
Read more…
Hi,
I've seen the jDrones 20A ESC has low voltage cutoff.
when i think of that - this will cause instant motor stopping, and immediate drop of the arducopter,
no ?
Is there any way to cancel that feature ? so that i could land my arducopter safely ev
Read more…XAvian is new open-source UAV project designed to address pest bird problems for agriculture and airports.
XAvian is in inception phase and is looking for foundation members skilled in all aspects of UAV flight.
The ultimate goal of the project is to g
Here:
you can see some sort of 4 resistors just under the GPS.
they are even not listed on the kit parts,
what's that ?
http://store.diydrones.com/v/vspfiles/photos/KT-APM-01-2.jpg
Read more…This is mostly for Jani... as it's hard to get a hold on him in the chat room or by email... busy man and we all appreciate the effort.
3 questions:
I was wondering about the updated "plastic" parts of the frame, I see a lot of nice pictures posted by
Read more…I plan on using the autopilot code a a model. What is the fastest way to go through to understand what everything does and the purpose for everything in the code? I ask since the code is so long, I'd like to know if there is a faster way to underst
Read more…Is there any interest in wide field of view lenses for the FLIR Tau camera for DIY applications?
We are considering adapting some of our standard WFOV lenses for the Tau.
What fields of view would be popular? 66 degrees, 70 degrees, 90 degrees?
Company
Read more…I am using the latest Ardupirates code with Mtk 16 mediatek gps & sonar
I discovered that i fly my quadrotor when i engage altitude hold, the quadrotor will remain at knee level. But the quadrotor will drift.
To prevent the drift, i immediate engage
Read more…Hi allHow can I use ultra-sonic sensor in obstacle avoidance .. and how can I connect it ??
Read more…Hi, I cant seem to get altitude hold to work. When I turn it on the motors just stop. I tried turning it on and the quad just fell out of the sky so I quickly turned it off and the motors came back on.
I'm using ArduPiratesNG (rev. 527) and I have th
Read more…Hi,
I am looking for a budget GPS unit to use with my Ardupilot for RTH.
Is this unit
 |
|
|||
| MediaTek MT3329 GPS 10Hz | ||||
|
||||
plug 'n play with ardupilot?. If not what to i need to make it be?. Regards, Teo |
||||
