Hey everyone,
I currently have two airframes running APM 2.5 with the new 2.70 firmaware, both were running perfectly on the 2.68 code however aftyer loading 2.70 both airframes now constantly lose altitude, this happens in all flight modes and was pe
Read more…Hi,
I have FRSky which seems to output 0-3v for their RSSI, whereas APM 2.5 code seems to use 0-5v
I'm not a programmer, but I can see it would need a small code tweak to rescale the 0-5v range to 0-3 by multiplying it by 0.6. Correct?
Optionally, it wo
Read more…Guys:
Today I was testing a 2.5 APM with MP 1.235.
The aircraft (Ritewing ZII) flies under stabilized flight as well as manual -OK. When I switch to auto mode, the aircraft turns toward the first waypoint, but it heads downwards to what looks like a
Read more…Hi
I am new to Ardupilot but using Arducopter for last few months.
I am interested in making a plane like Mugin but in the meanwhile I want to buy something like what
this website www.event38.com have for GIS. Problem is that they have no actual verifia
Read more…I've been playing around with the ArduPlane software 2.68 for a few weeks now and think I have found a few bugs in the navigation code that were preventing it from tracking accurately between waypoints in windy conditions. After correcting these bugs
Read more…I'm trying to mount my APM2.5+ in a different orientation. If I can rotate it 180 degrees so the 'Forward' indicator is facing backwards, it's going to be much easier to route the cabling. I've searched through the manual, and looked through pages
Read more…I seem to be having an issue with my APM2.0 board where only the rudder nudges while in any of the Auto modes ie Auto, Loiter & RTL. All controls work fine in Manual, Stabilize & FBW-A. While in Auto modes all servos move to stabilize when rocking th
Read more…Hi there,
I'm adding the works to my Bixler 2 and have a few interference questions as ideally, I want to build a nice little pod that can fit all the electronics in it that can be dropped into the top through the normal canopy.
The electronics I have
Read more…Does anyone know how to set guided waypoint on QGCS for APM the way we do by clicking on the map 'Fly to here' on APM MissionPlanner. I have to use qGCS because i need a gcs that can handle multiple MAVs simultaneously.
Thanks.
Read more…Hi.
Just got a new Aurora 9 to use with my APM projects. Previously was using a Futaba 12FG and i was able to set failsafe properly and works as it says in the wiki and what i want it to do, namely:
1. If in Auto remains in Auto and finish mission (dis
Read more…Hi folks, I just started playing with APM a few days ago when my board arrived, the project seems very solid.
Beside that I have a couple spare Arduino Mega boards here with some IMUs and I want to try the ArduPlane code on them, I started writting th
Read more…Hi,
Seeking some help here..my APM 2.5 flashed with ArduPlane 2.68 has this irritating issue of the compass being off everytime i start up the system . I will then enable it via the Mission Planner and all seems ok..then the next time i power on and c
Read more…Is there a place where photos of APM installations could be posted? I'm sure there are some really creative ideas that could be very instructive to Group members that don't do this type of work every day. Like how all this equipment is stuffed into a
Read more…I will ask the same question as someone else who never got an answer.
have i got to add pins to the apm 2.5 for a airspeed sensor or are they already taken care of in the row of pins at the top which take the airflow etc.
Thanks
Read more…just want to wish everyone on here a happy christmas and a great flying new year, seeing what this year has achieved on here cant wait for the next one.
cheers all
Was good to see the APM in action on the TV tonight, they flew a slingsby glider 20 miles with the APM and landed on the money..... :)
Read more…Hello everyone,
Does anyone know if its possible to log airspeed and altitude in graph format as i can only see roll, pitch and yaw.
many thanks
Read more…Hi Guys,
Just got a Castle Ice Lite 75 for my new Skywalker (Hopefully it last us longer than the last few ones)
Require some help on those who use Castle ESC with fixed endpoints setting. Do you :
1) set the end points on the tx with the esc first then
Read more…Hi All,
we finish built the arduplane stuff using apm2, when i try to plug battre and coming sound alert bip2, and then try move the thro, rudd, ail, elev, so only channel no. 4 working?? so any suggestion for me to fix this problem. thanks alot.
arief
Read more…Hi Arduplane Users,
Seeking some help if anyone has experienced this problem before with their APM.
We are currently using APM 2.5 on a Skywalker 1880. Its flashed with 2.40 firmware as we had some custom code changes to trigger camera and also log hea
Read more…