Gender
Male
About
Please tell us a bit about your UAV interest
FPV
Hometown:
CA
Activity Feed
"Check your MOT_SPIN_ARMED parameter."
"Have you tried redoing the ESC calibration?"
"Thank you!"
"Turnigy FlySky iMax Eurgle 9X Switch Error: http://youtu.be/GhwOWtcagnA"
"Zach,
Thank you so much man. The ESC calibration worked! I had zero problems after I did that. I could not induce an oscillation when I tried stabilize. I then tried autotune and it completed with no problems! My quad flies perfect now.…"
Thank you so much man. The ESC calibration worked! I had zero problems after I did that. I could not induce an oscillation when I tried stabilize. I then tried autotune and it completed with no problems! My quad flies perfect now.…"
"Zach,
I will definitely let you know if I find out what the problem with my quad is. I'm just not sure what else to try. I tried looking at my logs, but interpreting them isn't the easiest thing to do. I will have to go back and see if ATDE data is…"
I will definitely let you know if I find out what the problem with my quad is. I'm just not sure what else to try. I tried looking at my logs, but interpreting them isn't the easiest thing to do. I will have to go back and see if ATDE data is…"
"Hi. Sorry I cannot help, but your issue sounds similar to mine. I posted this ( http://diydrones.com/forum/topics/autotune-problem ) yesterday. My quad will start autotune and at some point during the tuning it tilts and takes off at what seems…"
Hi all. I posted this in the wrong forum yesterday, so I just edited it to post it to the 3.x forum. I am hoping someone can help me out. I appreciate any help that you can provide. My quadcopter flies fine except for the issue noted below. The…
"Maybe this will help? Not sure if it's the same issue.
http://diydrones.com/m/blogpost?id=705844%3ABlogPost%3A1001090"
http://diydrones.com/m/blogpost?id=705844%3ABlogPost%3A1001090"
Hi all. I don't have much experience (yet) with the APM 2.5. I have flown my delta wing with the APM 2.5 a long time ago for a total of 2 flights. Worked great. I recently installed it on my SkySurfer plane. I am trying to set the level…
"Thank you for your informative post. what program did you use to draw your figure 1 diagram? Thanks!"
"Very cool. I'm working on the same project right now. Thanks for sharing!"
Hi all. First off, sorry if this has been asked, but I just couldn't find a solid answer by searching. Every forum post I found about board orientation is for Arducopter. Ok, what I want to do is position my APM 90 degrees offset in the x…
"Look at the " tips" section in the link below :
http://code.google.com/p/ardupilot-mega/wiki/MPWaypoint
It will describe how to prefetch maps in the mission planner."
http://code.google.com/p/ardupilot-mega/wiki/MPWaypoint
It will describe how to prefetch maps in the mission planner."
