Gender
Male
About
Location
SV
Please tell us a bit about your UAV interest
Multirotor, UAV, DIY
Activity Feed
ORIGINAL POST IN ITALIAN LANGUAGE FROM QUADRICOTTERO NEWS: http://www.quadricottero.com/2015/07/il-bebop-drone-impazzisce-se-d... someone could be a way to do magic tricks but for the majority of those who use a Bebop is an annoying…
"Chris while piloting whit Marco Robustini at Ferrara Drone Show arena https://youtu.be/gbwT_yvSkUc?t=10m44s"
"Original post in italian language, Thanks Roberto
http://www.quadricottero.com/2014/09/la-imu-dei-droni-in-connected-..."
http://www.quadricottero.com/2014/09/la-imu-dei-droni-in-connected-..."
"Ciao Roberto, nell' esempio relativo alla richiesta di autorizzazione è indicato chiaramente che è relativo ai casi in cui si voglia svolgere lavoro aereo tramite droni.
Per uso ludico non c'e' bisogno di autorizzazione, i limiti di altezza e…"
Per uso ludico non c'e' bisogno di autorizzazione, i limiti di altezza e…"
"You have forgotten, "spaghetti"
However, great job !"
However, great job !"
"I flow my v12 dodecarotor two years ago. http://diydrones.com/profiles/blogs/armquad-v12
The total cost was about $ 500 camcorder included ;-)"
The total cost was about $ 500 camcorder included ;-)"
"Great news Roberto"
"Hi Marco,
Excellent work, but I would make note that I do not see the rubber dumper recommended in case of mikrokopter FC. ;-) Ciao"
Excellent work, but I would make note that I do not see the rubber dumper recommended in case of mikrokopter FC. ;-) Ciao"
"Emile and Roberto, very good work !!
These are the flight results that you must have an ARM. Soon I'll try to write my own code for the STM32 F4 discovery board.
Danilo"
These are the flight results that you must have an ARM. Soon I'll try to write my own code for the STM32 F4 discovery board.
Danilo"
"Hi Juan,
They are two separate sensors, but have the i2c bus in common"
They are two separate sensors, but have the i2c bus in common"
"@ Roberto, you are generous in your comments, thanks It would be nice if I could use your hardware (MP32) , right now I think it is the best for this type of application.
For patented V shape: http://mikrocontroller.com/files/AsctecPatent.pdf"
For patented V shape: http://mikrocontroller.com/files/AsctecPatent.pdf"
Hi, I built a V shaped with 12 motor and coaxial prop I know that the V shape is patented by Asctec.This is a test only for learning purpose.Is based on Coridium ARMmite pro controller.Motor: keda 50-20s with 8x4.5 propGyro ITG3200, Acc BMA180,…
"Hi Eduardo, very nice video.
you can kindly provide information or links on the adxrs giro mod on FC 1.3 ?"
you can kindly provide information or links on the adxrs giro mod on FC 1.3 ?"
"The frame is Q4 Y6 400 here
If you find the right combination of different pitch, the propellers can be run at the same speed without losing efficiency.
Not a big problem even with the same props, because when you are flying, the correction of…"
If you find the right combination of different pitch, the propellers can be run at the same speed without losing efficiency.
Not a big problem even with the same props, because when you are flying, the correction of…"
"Hi all,
I updated the post with a picture with some hardware details
It is true, coax loses 10 to 20% efficiency. However, in my software, the propellers above run at 5% less than the lower prop.IMHO for flying time is more important to use…"
I updated the post with a picture with some hardware details
It is true, coax loses 10 to 20% efficiency. However, in my software, the propellers above run at 5% less than the lower prop.IMHO for flying time is more important to use…"
"Hi Keith
the yaw is controlled by three propellers that rotate in the same direction.3 propellers for the yaw to the right and the other 3 for the left yaw"
the yaw is controlled by three propellers that rotate in the same direction.3 propellers for the yaw to the right and the other 3 for the left yaw"
